User Guide

8 © 2001 Directed Electronics, Inc. Vista, CA
starter kill harness (H2) wire connection guide
______
______
Use one of these wire as a starter kill input and the other as a starter kill output wire (these wires are inter-
changeable).
plug-in LED and valet/program switch
The LED and the Valet/Program switch both plug into the control module. The status LED plugs into the white
two-pin port, while the Valet/Program switch should be plugged into the blue two-pin port. The status LED and
Valet/Program switch each fit into
9
/32-inch holes.
Status LED Valet/Program Switch
H2/1 and H2/2 BLACK starter kill wires
BLACK STARTER KILL OUTPUT
BLACK STARTER KILL INPUT
H2/1
H2/2