User Guide

26 © 2000 Directed Electronics, Inc. Vista, CA
troubleshooting
The Valet
®
switch does not work.
■ Is it plugged into the correct socket? See Plug-In LED and Valet
®
/Program Switch section. Is the H1/9 YELLOW
wire properly connected? See Primary Harness (H1) Wire Connection Guide section of this guide.
Status LED does not work.
■ Is the LED plugged into the small white port on the side of the control unit? See Plug-In LED and
Valet
®
/Program Switch section.
Door locks operate backwards.
■ This unit has easily-reversed lock/unlock outputs. Recheck Relay Harness (H2), Wire Connection Guide section
to see if you have reversed these.