User Guide

You can advance from feature to feature by pressing and releasing the Valet

/Program switch the number of times

necessary to get from the feature you just programmed to the feature you wish to access. For example, if you just

programmed Feature 1 and you want to program Feature 2:

1. Release the Valet

/Program switch.

2. Press and release the Valet/Program switch once to advance from Feature 1 to Feature 2.

3. Press the Valet

/Program switch once more and HOLD it.

4. The LED will flash in groups of two and the horn will honk twice (if connected) to confirm that you have

accessed Feature 2.

The learn routine will be exited if:

■ The ignition is turned on.

■ The Valet

/Program switch is pressed too many times.

■ More than 15 seconds elapses between steps.

One long horn honk (if connected) indicates that the Learn Routine has been exited.

features menu

FEATURE DEFAULT LED ON SETTINGS LED OFF SETTINGS

NUMBER (PRESS CHANNEL 1 TRANSMITTER BUTTON) (PRESS CHANNEL 2 TRANSMITTER BUTTON)

1 Ignition-controlled door locks ON Ignition-controlled door locks OFF

2 0.8 second door lock pulse duration 3.5 second door lock pulse duration

3 Double pulse unlock OFF Double pulse unlock ON

4 Security features ON Security features OFF

5 Code Hopping ON Code Hopping OFF

NOTE: The LED ON settings are the default settings, except where indicated in bold type.

to exit the learn routine

to access another feature