Data Sheet
© DEHN + SÖHNE GmbH + Co. KG · Hans-Dehn-Str. 1 · Postfach 1640 · D-92306 Neumarkt · Tel. +499181 906-0 · www.dehn.de
3,
t
e
s
t
e
d
: Tested +: New (: Discontinued Model
Product Data Sheet: DEHNrail modular, multipole
DR M 4P 255 (953 400)
■ Four-pole surge arrester consisting of a base element and a plug-in protection module
■ High discharge capacity due to heavy-duty zinc oxide varistor / spark gap combination
■ Energy coordination with other arresters of the Red/Line product family
Figure without obligation
Basic circuit diagram DR M 4P 255 Dimension drawing DR M 4P 255
Four-pole surge arrester consisting of a base part and a plug-in protection module; FM version with floating remote signalling contact.
Type
DR M 4P 255
Part No.
953 400
SPD according to EN 61643-11 / IEC 61643-11
type 3 / class III
Nominal voltage (a.c.) (U
N
)
230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) (U
C
)
255 / 440 V (50 / 60 Hz)
Nominal load current (a.c.) (I
L
)
25A
Nominal discharge current (8/20 µs) (I
n
)
3kA
Total discharge current (8/20 µs) [L1+L2+L3+N-PE] (I
total
)
8kA
Combination wave (U
OC
)
6kV
Combination wave [L1+L2+L3+N-PE] (U
OC total
)
16kV
Voltage protection level [L-N] / [L/N-PE] (U
P
)
≤ 1000 / ≤ 1500V
Response time [L-N] (t
A
)
≤ 25ns
Response time [L/N-PE] (t
A
)
≤ 100ns
Max. mains-side overcurrent protection
25 A gG or B 25 A
Short-circuit withstand capability for mains-side overcurrent
protection with 25 A gL/gG (I
SCCR
)
6 kA
rms
Temporary overvoltage (TOV) [L-N] (U
T
) – Characteristic
335 V / 5 sec. – withstand
Temporary overvoltage (TOV) [L-N] (U
T
) – Characteristic
440 V / 120 min. – safe failure
Temporary overvoltage (TOV) [L/N-PE] (U
T
) – Characteristic
335 V / 120 min. – withstand
Temporary overvoltage (TOV) [L/N-PE] (U
T
) – Characteristic
440 V / 5 sec. – withstand
Temporary overvoltage (TOV) [N-PE] (U
T
) – Characteristic
1200 V / 200 ms – safe failure
Operating temperature range (T
U
)
-40 °C ... +80 °C
Operating state / fault indication
green / red
Number of ports
1
Cross-sectional area (min.)
0.5 mm
2
solid / flexible
Cross-sectional area (max.)
4 mm
2
stranded / 2.5 mm
2
flexible
For mounting on
35 mm DIN rails acc. to EN 60715
Enclosure material
thermoplastic, red, UL 94 V-0
Place of installation
indoor installation
Degree of protection
IP 20
Capacity
2 modules, DIN 43880
Approvals
KEMA, VDE
Weight
147g
Customs tariff number (Comb. Nomenclature EU)
85363030
GTIN
4013364115767
PU
1pc(s)
We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.

