Specifications

The installed DEGERtraker tracking system has to be protected against trepassing in its hole

sphere of action by adapted measures, for example by errecting a fence.

While assemblage of the DEGERtraker 7000NT or parts of the system and while the system is

put into operation some risks of injury exist caused by moveable parts of the tracking system. To

protect injuries caused by eventually existing burrs or sharp angles we imperatively recommend

to wear gloves when mounting the steel parts of the system.

In case of checks or changes at the DEGERtraker 7000NT all parts of the system have to be

free of potential. Zero-potential and mechanical protection have to be proven and guaranteed

due to the “Allgemeinen Regeln zur Unfallverhütung”. When voltage supply is indispensable for

checking the system injuries of persons have to be ruled out by adapted actions.

Lightning protection and earthing have to be achieved due to DIN VDE 0185 or 0100 as with all

photovoltaic systems.

The hole sphere of action has to be free of any objects.

The DEGERtraker 7000NT can be moved manually by activating with 24VDC to the clamps 16-

17 (Elevation-axle) or to the clamps 18-19 (East-West-axle) for example by using a pushbutton.

Therefore please pay attention to chapter 3.2 and 3.3 of this assembly instruction.

The development of the DEGERtraker 7000NT is based on the DIN 1055-4. With application of

the windguard the system resits to higher demands than the values that are given in the norm.

In case of accumulation of snow on the module surface with more than 35kg/m² it is necessary

to broach the module surface. It is possible to do this by activating manually the elevation-drive

as described above.

Intended Use

The DEGERtraker 7000NT is designed and dimensioned to be applied with Standard-

Photovoltaic modules and is therefore not adapted to be applied with Concentrator-modules,

mirrors, solar thermal collectors etc. The denoted maximum modulespace of 60m² must not be

exceeded in any case and has to be reduced according to regional conditions and regulations if

necessary. As soon as the modules are mounted an operating wind guard has to be assembled

or the modulespace has to stay in the horizontal position.

Permissible ambient temperature: -20°C to +55°C

Sound level : Distance 10m: 40 dB(A)

Distance 20m: no difference to the sound level

of the surrounding measurable

Reference value:

40 dB(A) corresponds to: - tweet of a bird

- usual background

sound level in a house

1. Securit

advices