Specifications

11
.
2.5 Assembly of the base frame
2nd step:
Built in stainless steel bolt M24x180
(Pos.11) with washer M24 (Pos.13)
and nut M24 (Pos.12). Do not screw
the stainless steel bolts too tightly, to
ensure that the shackles at the rotating
head are not pressed together.
Sliding bearing connectors are
integrated in the point of rotation of the
base frame – these should be
lubricated slightly for initial assembly
only.
1st step:
Suspend the base frame (Pos.3) by
using a crane in such a way that the
bore holes at the tip of rotation of the
base frame are at the top and the
connection for the EL motor (EMO) is
on the left.
Pos.3
Pos.1
Pos.3
Pos.2
Pos.2
Pos.11
M24x180
Pos.12 +
Pos.13
Pos.13