Specifications

7
POWER ON/OFF
Press the “SLEEP” button (1) once to turn on the radio, press it again to turn
off the radio.
ALARMS
You can set two alarms within 24 hours: Alarm 1 and Alarm 2. You can set to
any desired turn on time, station preset, volume and turn off time as you like.
When the set alarm time is reached, the radio will be turned on and turned off
automatically according to the set alarm time.
VOLUME CONTROL
The radio has 64 steps (0 – 63) of volume control. The default volume is set
to 40. The LCD panel will show the volume control steps during adjustment of
volume.
Method 1: When the radio is in turn on mode, press the “VOL” button (15), the
VOL sign on the LCD panel will flash for about 3 seconds. Rotate the “TUNE”
knob (15) to adjust the volume of the radio.
Method 2: Press the numeric keys then press the “VOL” button (15) quickly,
the volume level will be adjusted to your input level,
e.g. setting the volume level to 30:
press (3)  (0)  “VOL”
(each step should be executed within 3 seconds)
USING THE DX/LOCAL SWITCH
When tuning to SW or MW bands, you can use the DX/LOCAL (23) switch to
enhance reception.
In normal situations, this switch should be set to the DX position. If you are
listening to local station or station with a strong signal, this switch should be set
to the LO position.