Specifications

Socket (25).

3. Turn the radio off, press the “VOL” button (18) with one hand and rotate the

“TUNE” knob (15) with another hand to set the recharge time. The

recharge time can be set from 1 to 23 hours. When the “VOL” button is

released, recharge of batteries will start.

4. When recharge of batteries is taking place, you will be able to observe the

movements of the battery level ladder signs from short to tall.

5. The recharge process will terminate at the time that you set.

PRECAUTIONS

1. It is not possible to recharge batteries when the radio is turned on.

However, it is possible to turn on the radio during the recharge process,

reception will not be affected.

2. If you turn on the radio during the recharge process, it will not have any

adverse effect on the recharging batteries.

3. The drain of current for this radio is about 100 mA, the recharge time can

be calculated as follows: recharge time (hours) = capacity of battery (mAH)

divided by 100 (mA). It the batteries to be recharged are not fully

exhausted, the recharging time should be reduced accordingly.

4. When the radio is in turn off mode, pressing the “VOL” button (18) for a

longer period of time will be able to see the remaining time in hours for the

recharge process.

5. The recharge process will be terminated automatically when the set

recharge time is reached.

6. Do not re-recharge batteries that are fully recharged already.

7. The AC Adaptor (DC06) will have no effect on the batteries before the

recharging process is started.

8. The capacity of the rechargeable batteries will decrease with the increase

of time and usage. Replace with new ones when this occurs.

9. Please give priority to using Ni-MH rechargeable batteries.

HINTS

 When the radio is turned on during the recharging process, the BATTERY

SIGN will be displayed on the LCD panel.

 Please use good quality rechargeable batteries for the recharging process,

recharge may terminate before the set time for using bad or poor contacts