Specifications

15
2. Continuous backlight: When using the AC Adaptor with the radio, the
backlights will be on continuously.
3. No backlight: Push the backlight switch to the “OFF” position.
TONE SELECTION
FM STEREO / MONO (ST/MO)
Stereo mode is good for listening FM music programs with strong transmission
signals. Press the “SSB” (6) button will switch from Mono to Stereo or vice
versa. Mono mode should be used for listening to weak signal stations.
NEWS / MUSIC
When listening to musical programs, set the News/Music Switch (14) to
“MUSIC”, or set the switch to “NEWS” when listening to news.
NARROW / WIDE BANDWIDTH
When listening to MW, SW and LW stations, using the appropriate bandwidth
could enhance reception results. This radio is a dual conversion radio, the
first IF is 55.845 MHz., and the second IF is 450 KHz.
Use the Narrow/Wide Switch (14) to select the most suitable bandwidth for
listening:
Wide: bandwidth is 6 KHz., better sound quality but selectivity is ordinary
Narrow: bandwidth is 4 KHz., sound is dull but selectivity is good.
RESET FUNCTION
The IC inside the radio may be affected by outside interference, resulting in the
radio not operating properly. When this occurs, use a sharp and thin object to
press the Reset Hole (2). The radio will be back to normal, all memory
presets are still there, but you will have to re-set the clock.
LINE OUT