Owner’s Manual 521 SOLID PLATE STOVE CONTENTS 2 2 2 2 3 3 3 3 4 4 5 www.defy.co.
INSTALLATION • Remove all packing material and place the stove on a flat level surface. ELECTRICAL INSTALLATION • • • • • The stove should be connected to the mains through a double pole isolating switch which has a minimum clearance between the contacts of 3 mm. in all poles. The appliance must be connected by means of wires having an appropriate temperature marking. A disconnection (terminal block) must be provided in the fixed wiring.
SOLID PLATES Before using the plates for the first time, switch them on for four minutes at the highest setting. This allows the factory applied protective coating to burn in. The markings around the plate control knobs represent the following heat settings: Position 1 = Warming. 2 = Slow simmer. 3 = Simmer. 4 = Medium heat. 5 = High heat 6 = Boiling and frying. The plate indicator light will glow when a plate is switched on.
CONTROLS PLATE CONTROLS OVEN CONTROL The Ringer timer may be used for timing the cooking process for up to one hour. Wind up the timer by turning the knob fully clockwise and return the knob to the setting required. At the end of the time period the bell will ring.
WARNING SURFACE AREAS OF HEATING AND COOKING APPLIANCES AS WELL AS ELEMENTS AND OVEN INTERIORS GET HOT ALWAYS KEEP CHILDREN WELL AWAY WHEN THE UNIT IS IN USE Part Number 060 639
