User's Manual

CUSTOMISING PROGRAMMES
SELECTION PROCEDURE
WA S H ON LY
RINSE ONLY
SPIN ONLY
WASH AND
RINSE
WASH AND
SPIN
RINSE AND
SPIN
WA S H, RI NSE
AND SPIN
START
HOLD
WASH
RINSE
SPIN
WASH
RINSE
WASH
SPIN
RINSE SPIN
WASH
RINSE
SPIN
• Press the Start Hold pad
to begin the programme.
• Press the Start Hold pad
once more to interrupt the
programme and stop the
machine.
• Press the Start Hold pad
once more to continue the
programme from where it
was interrupted.
• At the end of the cycle a
buzzer will sound and the
power will be switched
off automatically.
Press the
Power
ON / OFF
pad.
BEFORE ANY OF THE WASH OPTIONS ARE SELECTED YOU MUST FIRST:
• Insert the power plug into an earthed wall socket and switch on.
• Open the hot and cold water taps.
• Load the washing into the machine. (see Loading)
• Add detergent and if necessary softener and bleach. (See Adding detergents)
• Close the lid.
• NOTE: DO NOT OPEN THE HOT WATER TAP BY ITSELF.
• IT IS ESSENTIAL TO OPEN THE COLD WATER TAP FOR ALL
PROGRAMMES. THE MACHINE RINSES IN COLD WATER EVEN WHEN
USING A HOT WASH.
HOT
OPTIONAL
COLD