Instruction Manual

Page 10
Anti-tilt mechanism
All stoves can tilt if you or a child
sit or lean on an open oven door.
• “A” 1 x Stability chain
• “B” 1 x Stability hook with
anchor sleeve
• “A” is factory fitted at the rear
of the stove in the centre. (See
overleaf for instructions if the
removable splashback is to be
fitted)
• Position the stove and move
“A” to touch the wall behind
the stove.
• Mark the hole where “A”
touches the wall behind the
stove.
• Move the stove away from the
wall to allow for an area to work
in.
• Using a 8.0 mm concrete bit,
drill a hole at the marked
position.
WARNING: in order to
prevent tipping of the
appliance, this stabilizing
means must be installed.
Refer to the instruction for
installation.
• Using the Stability hook and
anchor sleeve “B”, firmly secure
“B” to the wall.
• Slide the stove back in position
and engage the stability chain
“A” onto stability hook “B”.
• The stove is then secured and
will not accidentally tilt if
downward pressure is applied
to the open oven door.