User guide

18
Your machine left the factory with the Machine Stops Action set as the default.
To set your machine to Automatic Recovery:

Access the SETTINGS menu (refer to page 16).

Select OUT OF BALANCE RECOVERY.

Select ON.

Automatic Recovery is now activated.
End of Cycle Beeps
The beeps signalling the end of the cycle can be set to zero, five or fifteen.

Access the SETTINGS menu (refer to page 16).

Select END OF CYCLE BEEPS.

Use the scroll buttons to highlight the number of beeps you would prefer, then touch .
Reset Defaults
If you wish to reset all settings back to those that are set when your machine leaves our factory:

Access the SETTINGS menu (refer to page 16).

Select RESET DEFAULTS.

Select YES to reset to the factory default.
Display
Brightness
You can adjust the brightness of your display screen to suit your individual needs.

Access the SETTINGS menu (refer to page 16).

Select DISPLAY.

Select BRIGHTNESS.

Use the scroll buttons to increase or decrease the screen brightness.

Touch to confirm your selection and return to the SETTINGS menu.
Contrast
You can adjust the contrast of your display screen to suit your individual needs.

Access the SETTINGS menu (refer to page 16).

Select DISPLAY.

Select CONTRAST.

Use the scroll buttons to increase or decrease the screen contrast.

Touch to confirm your selection and return to the SETTINGS menu.
Press
to exit the SETTINGS menu.
Adjusting the wash settings