Owner's Manual

4. Always use two wall anchors and two screws per
bracket. We do not provide mounting screws
or other
hardware because we do not know to what kind
of
material you will be attaching the speaker.
5. For wood surfaces and studs, use wood screws; for
sheetrock
or gypsum, you should use wall anchors;
for masonry, use masonry anchors.
Q:mmm> - -
Step 4~ _
I
I
lL
----~-~
I. Connect the speaker wires to the loudspeaker.
2. Place the ball pivot into the wall bracket clamp.
3. Hold the loudspeaker securely with one hand and
tighten the clamping screw until you feel friction
between the ball pivot and the clamp, but not so
tight as to prevent easy aiming
of the speaker.
4. Adjust the speaker to the desired angle and tighten
the clamping screw firmly.
5. Do not over-tighten as that may strip the screw threads.
6. Do not attempt to adjust the speaker angle while the clamping screw is tight.
7. To adjust the loudspeaker angle, loosen the clamping screw, adjust the position
and re-tighten the clamping screw.
Technical Assistance
It is our pleasure to offer assistance if you have any questions regarding your
ProMount 90
or its set-up. Please contact your nearest Definitive Technology deal-
er
or call us directly at [phone] (US & Canada), 01 [phone]
(all other countries), or e-mail [e-mail].
Visit us at www.definitivetech.com.
EPAT100208
.
For more information on Definitive Te(hnology Loudspeakers and a«essories, .
visit www.definitivete(h.com. or email info@definitivete(h.(om. i
Definitive Te(hnology, Owings Mills, Maryland, USA. 410-363-7148 .; -.
-,
-tive Techt!fJ!ngy®
, in High-Performance Loudspeakers
o