Manualshelf

Owner's Manual

ManualsBrandsDefinitive Technology ManualsHome AudioMythos GemStand
12
Definiti~
echnology
····0
·····m
······0
The only stand custom designed and engineered/or Definitive Technology Gem Loudspeakers.
Parts:
• Post
0,
including Top Cap, Pads, Speaker Screw 0 ,Hidden Wire Channel
e.
• Translucent Bottom Pad
4]).
• Glass Base
0,
including preattached Feet.
• Carpet Spikes, Rubber Feet
O.
• Bottom Assembly: Bolt Cover Skirt
@,
Steel Insert
ID,
Cap Screws (2)
O.
• Hex Key.
Attach Post
to
Glass Base:
1.
With Glass Base 0 upside down (feet up), place the Bolt Cover Skirt @ open side
up
(with curve matching base) over Screw Holes.
2.
Place the Steel Insert
ID
into the Bolt Cover Skirt. Insert the Two Cap Screws 0
into this assembly.
3.
Slide the Translucent Bottom Pad
4])
over Screws on the other side
of
the Glass Base.
This will hold the assembly in place.
4.
Line up Cap Screws with bottom
of
Post 0 .
5.
Secure assembly to Post by tightening the two Cap Screws firmly using the Hex Key.
Do not overtighten.
6.
Attach Carpet Spikes (for use with carpet) or Rubber Feet (for hard floor use).
7.
Set stand upright. Push Spikes (if used) into carpet for stability.
Attach Gem
Speaker
to
GemStand:
1.
Prewire the GemStand Post using the hidden wire channel provided.
2.
Make your wire connections to the Gem Loudspeaker before attaching the
loudspeaker to the stand.
3.
Remove the plastic plug from the Insert Nut on the rear
of
the Gem Loudspeaker.
This
is
the small hole located above the connectors.
4. Position the Gem Loudspeaker to accept the GemStand's Speaker Screw. Insert a
Phillip's Head screwdriver through the GemStand's Post and tighten the Speaker Screw
into the Insert Nut. Tighten securely, but do not overtighten.
Get
a
FREE
Definitive
Mythos
button!
Email
mythosbutton@definitivetech.com
with
your
name
and
shipping
address
and
we'll
send
you
a
button
FREE!
(Actual
size:
3",
black
on
white,
metal
pin
back.)
Gem
loudspeaker
front
stage
speaker
setup:
For
best
imaging
performance,
create
an
equilateroltriangle
between
the
speakers
and
your
listening
position.
Aim
speakers
"in,"
if
necessary.
For
more
information
on
Definitive
Technology
Loudspeakers
and
accessories,
:
1.
visit
www.definitivetech.com.
or
email
info@definitivetech.com.
.
Definitive
Technology,
Owings
Mills,
Maryland,
USA.
41
0-363-7148
!~
Dejjnitive
Techrwhgy®
The
Leader
in
High-Performance Loudspeakers"

Summary of content (2 pages)