Owner's Manual

10
• Place the speaker carefully into the cutout. If you have a level, use it to help you correctly align rectangular speaker models.
Tighten the lock arm screws with a screwdriver [Figure 15]. This will rotate the lock arms [Figure 16] and secure the speaker
to the wall/ceiling.
Do not over-tighten the lock arm screws. If you are using a powered screwdriver or drill, set the torque to a value of
7 in. – lb. (8dN – m). Install the grille on the speaker frame. Powerful magnets hold the grille in place.
Figure 15 Figure 16
Lock arm screws.
Turn clockwise to tighten
lock arms and secure
speakers to surface.
'
'
'
'
'
·J