Owner's Manual
Table Of Contents
9
• Push down on the top of the terminal
to reveal the wire hole in the side of
the terminal post and insert the wire
into the hole [Figure 12].
Release the pressure on the terminal
to secure the wire.
• Loosen the rotating lock arms by turning the lock arm screws on the front of the speaker counter clockwise 1⁄2 to 1 turn, just enough
to allow the lock arm to move freely. [Figure 13]. Make sure that the rotating lock arms are ipped inwards [Figure 14] so that your
speaker ts into your cutout.
Figure 13 Figure 14
Lock arm screws.
Turn counter clockwise
to loosen.
Lock arms tucked
in prior to installing
speaker in wall.
Figure 12
•
t