Owner's Manual
Table Of Contents
Safety
Precautions
CAUTION!
To
reduce the risk
of
electric shock and fire, do not remove the cover or back
plate
of
this device. There are no user serviceable parts inside. Please refer all servicing to
licensed service technicians. A vis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The,intemational symbol
of
a lightning bolt inside a triangle is intended to alert
the user to uninsulated "dangerous voltage" within the device's enclosure. The international
symbol
of
an exclamation point inside a triangle is intended to alert the user to the presence
of
important operating, maintenance and servicing information in the manual accompanying
the device.
CAUTION! To prevent electrical shock, match wide blade
of
plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION!
To
reduce the risk
of
electrical shock, do not expose this equipment to rain
or
moisture.
1.
Read
Instructions-All
safety and operating instructions should be read before operating the device.
2.
Retain
Instructions-
The safety and operating instructions should be retained for future reference.
3.
Heed
Warnings-All
warnings on the device and in the operating instructions should be adhered to.
4. Follow
Instructions-All
operating and safety instructions should be followed.
5. Water
&
Moisture-
The device should never be used in,
on
or near water for risk
of
fatal shock.
6.
Carts &
Stands-
The device should only be used on carts
or
stands recommended by the manufacturer.
7. Wall
& Ceiling
Mounting-The
device should be mounted on a wall
or
ceiling only as recommended
by the manufacturer.
8.
Ventilation-
The device should always be located in such a way that it maintains proper ventilation. It
should never be placed in a built-in installation or anywhere that may impede the flow
of
air
through its
heat sink.
9.
Heat-Never
locate the device near heat sources such as radiators, floor registers, stoves
or
other
heat -generating devices.
10. Power
Supply-
The device should only be connected to a power supply
of
the type described in the
operating instructions
or
as marked
on
the device.
11. Power Cord
Protection-Power
cables should be routed so they are not likely to be stepped on
or
crushed by items placed
on
them
or
against them. Special attention should be paid to areas where the
plug enters a socket
or
fused strip and where the cord exits the device.
12.
Cleaning-The
device should be cleaned in accordance with manufacturer's instructions.
13. Periods
Of
Non-Use-
The device should be unplugged when not being used for extended periods.
14. Dangerous
Entry-Care
should be taken that no foreign objects
or
liquids fall or are spilled inside
the device.
15. Damage Requiring
Service-The
device should
be
serviced
by
licensed technicians when:
•
The
plug
or
power
supply cord has been damaged.
• Objects have fallen
or
liquid spilled inside
of
the device.
•
The
device has
been
exposed to moisture.
• The device does
not
appear to
be
operating properly
or
exhibits a marked change in performance.
• The device has been dropped
or
the cabinet becomes damaged.
16.
Service-
The
device should always
be
serviced
by
licensed technicians. Only replacement parts
specified
by
the manufacturer should
be
used.
The
use
of
unauthorized substitutions
may
result in
fire, shock,
or
other hazards.