5.
What’s in the Box Sound bar Power supply Subwoofer power cord Four risers (magnetic) Power cord IR Adapters (input and output) Optical cable HDMI HDMI AUX 6 Subwoofer AAA AAA HDMI cable HDMI OPTICAL Two AAA batteries Remote control Literature AAA AAA Two spaces for wall mounting
Setup 1. Place the sound bar TV For the best listening experience, position the sound bar centered under your TV. You may choose to place it either on a stand, or wallmount the sound bar below the TV. 2. Connect the sound bar to an AC outlet 3. Place the subwoofer Sound Bar During startup, you will see multiple light shows. When all 10 LEDs are blinking slowly, the sound bar is ready to be set up with the Google Home app.
4. Connect the subwoofer to an AC outlet A solid light will be visible on the back of the subwoofer to indicate that it is paired to the sound bar. 5. TV Sound Bar Download the Google Home App to setup your sound bar on your Wi-Fi network Download the free Google Home app and follow the in-app instructions to setup the sound bar on your Wi-Fi network. For more detailed setup information about Google Home and Chromecast built-in for audio, visit: https://support.google.
6. Connect to your TV Is an HDMI input jack on your TV labeled “ARC”? YES — Use HDMI (ARC) NO — Use all sources into your Studio Advance via HDMI TV ARC OUT TV HDMI IN ARC TV HDMI IN Blu-ray Cable Connect the included HDMI cable to the HDMI jacks labeled with “ARC” on both the TV and the sound bar. The HDMI cable runs from the HDMI output of the Studio Advance to an HDMI input on the TV set.
Connect to your TV (cont.) If your TV does not have HDMI, use Optical All sources into your TV with 3.5mm analog mini-jack to the sound bar INPUTS INPUTS HDMI IN TV OPT OUT Blu-ray Cable FIRMWARE AUX IN OPT IN POWER HDMI IN TV AUX OUT Blu-ray Cable FIRMWARE AUX IN OPT IN POWER Connect the included Optical cable between the TV and sound bar. With certain TV models you may need to turn the internal TV speakers off or set the sound to external speaker.
7. Turn on your TV and enjoy the Studio Advance Turn on your TV and verify that you are hearing sound from the sound bar. Note: Access your TV’s menu and turn off its internal speakers. If you do not hear sound and do not see any lights on the front of your sound bar, press the power button on the sound bar to turn it on.
Functionalities 1. Using your TV remote to control the volume The Studio Advance comes pre-configured to respond to volume and mute commands from the most popular TV remotes including: Samsung, LG, Sony, Vizio and other major brands.* All other trademarks, product names, logos and brands referenced herein are the property of their respective owners * 2. Listening to music via Bluetooth® • Bluetooth will only work after the product has been set up using the Google Home app.
3. Chromecast built-in benefits The Studio Advance features Chromecast built-in for easy streaming and more: • Stream music from your favorite apps over Wi-Fi. • Create a whole-home audio experience. Multi-room sync lets you play the same song across Chromecast built-in compatible speakers in your house at the same time. • Use Google Assistant on a Google Home speaker or other Assistant-enabled device to control music playback on the Studio Advance with voice commands.
Remote Control Power On/Off Mute HDMI TV Input HDMI HDMI OPTICAL AUX HDMI Inputs 6 Master Volume Up Master Volume Down Center Down Center Up Bass Down Bass Up Movie Mode Music Mode Night Mode Night Mode
Sound Bar Controls Front of Studio Advance • Power - Turns the Studio Advance on/off • Source - Switches sound bar inputs • Bluetooth - Initiates Bluetooth pairing • Volume Down - Decreases the master volume • Volume Up - Increases the master volume
Back of Studio Advance IR Input TV ARC Out HDMI 1 HDMI 2 HDMI 3 Firmware Aux In Opt In Power IR Output
Visual LED Indicators (Sound Bar) SOURCE INDICATORS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Above is a closeup of the source indicators. HDMI 1 HDMI 2 HDMI 3 HDMI ARC OPTICAL AUX BLUETOOTH CHROMECAST Several source colors indicate the audio bitstream for non-streaming inputs. PCM CONTENT DOLBY CONTENT DTS CONTENT NOTE: All source indicators appear for three seconds before fading to off.
MUTE INDICATOR While MUTE is active, the source indication will blink. VOLUME LEVEL INDICATORS Master Volume will be indicated with 10 LEDs. Each LED will have 10 levels of brightness to indicate 1-100% volume. Volume 1% will be indicated with the left most volume dimly lit, volume 100% will be indicated with all 10 volume LEDs fully illuminated. Volume indicators will illuminate in purple instead of white to indicate the state of Night Mode. In Standby, all lights are off.
Optimize Your Listening Experience CENTER Less CENTER DEFAULT LEVEL BASS DEFAULT LEVEL More BASS Customize the bass level using the bass (+/-) buttons on your sound bar remote. HDMI HDMI OPTICAL AUX 6 More CENTER Customize the voice level to reproduce clear, crisp dialogue on your sound bar using the center (+/-) button on your sound bar remote.
Sound Modes Music Mode Music mode provides a natural and balanced sound profile with smoother bass while minimizing home theater spatialization effects. NIGHT MODE Movie Mode Movie mode is optimized for both movies and TV content. It provides home theater spatialization effects, as well as enhanced dialogue and more dynamic bass impact. This is the default sound mode for HDMI and Optical input sources. NIGHT MODE NIGHT MODE Night Mode Night mode is optimal for low-volume listening.
Using Your TV or Cable/Satellite TV Remote to Control the Studio Advance Here’s now to use your TV, cable, or satellite remote to control the Studio Advance. HDMI CEC CONTROL If your TV is connected via HDMI ARC and your TV supports CEC (and it is enabled in the TV settings menu), you can control the volume and mute functions on the Studio Advance from your TV without any further setup.
Placement Options TABLETOP MOUNTING The Studio Advance comes with extra riser feet (two per side) that magnetically attach to the bar to raise it as much as 15.2 mm (5/8”) off the tabletop so the bar will clear the TV’s protruding table stand. IR INPUT Attach magnetic feet: Peel off the protective cover and expose the magnets. Attach the feet to the bottom edge of the sound bar.
IR INPUT MOUNTING THE SOUND BAR ON THE WALL The Studio Advance has built-in keyhole slots so you can wall-mount it beneath your wall-mounted television. Spacers are included to help secure and install your sound bar on the wall. IR OUTPUT NOTE: DO NOT mount the Studio Advance directly to the wall. You must use the supplied wallmount spacers to ensure proper operation and reliability. DO MAKE SURE you are using a wall anchor of suitable load-bearing capacity (13.65 lb). 812.
For Further Assistance: Phone Number (800) 228-7148 (North America) Email definitive@custhelp.
1 Viper Way Vista, CA 92081 800-228-7148 www.definitivetechnology.com Sound United Europe a division of D&M Europe B.V.
Important Product Information
Safety Precautions FCC Statement COMPLIANCE INFORMATION Product Name: 5.1 Home Theater Sound Bar and Wireless Subwoofer System Model Number: Studio Advance and Studio Advance Subwoofer CONTAINS TRANSMITTER MODULE FCC ID: IPUJMDD FCC ID: IPUSTUADVBAR (BAR) FCC ID: IPUSTUADVSUB (SUBWOOFER) 1. This device complies with Part 15 of the FCC Rules.
This device complies with Industry Canada licenseexempt RSS standard(s). 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. For Canadian customers : CAN ICES-3(B) / NMB-3(B) Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits.
building-in space such as a book case or similar unit, and keep well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 20. No naked flame sources, such as lighted candles, should be placed on the apparatus. 21. C AUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 22.
1-Year Limited Warranty Definitive Technology, LLC (“Definitive Technology”) warrants to the original retail purchaser that Definitive Technology branded wireless speakers, will be free from defects in materials and workmanship for a period of (1) one year, under normal use and conditions. Should this product prove to be defective in material or workmanship, Definitive Technology will, at its option, (a) repair the product, or (b) replace the product.
FR Consignes de sécurité Déclaration de la FCC INFORMATIONS RELATIVES À LA CONFORMITÉ Nom du produit : Barre de son Home cinéma 5.1 et système de subwoofer sans fil Numéro de modèle : Studio Advance et Studio Advance Subwoofer CONTIENT LE FCC ID DU MODULE ÉMETTEUR : IPUJMDD FCC ID: IPUSTUADVBAR (BAR) FCC ID: IPUSTUADVSUB (Subwoofer) Cet appareil est conforme à la Part 15 des FCC rules.
possible du corps de l’utilisateur ou si l’appareil est réglé sur une puissance de sortie inférieure, si cette fonction est disponible. Canada, Avis d’Industrie Canada (IC) Cet appareil numérique de Class B est conforme à la norme canadienne ICES-003.
16. N’ouvrez pas cet équipement afin de réduire les risques d’électrocution. Pour des raisons de sécurité, seul du personnel qualifié peut ouvrir l’appareil. 17. AVERTISSEMENT : afin de réduire le risque d’incendie ou d’électrocution, n’exposez pas cet appareil à la pluie ou à l’humidité. L’appareil ne doit pas être exposé à des gouttes ou des éclaboussures et aucun objet contenant des liquides, comme des vases, ne doit être placé sur l’appareil. 18.
Garantie limitée de 2 an Definitive Technology, LLC (« Definitive Technology ») garantit à l’acheteur au détail original que les enceintes sans fil de marque Definitive Technology sont exemptes de défauts de matériel et de main d’œuvre pour une durée de deux (2) an dans des conditions normales d’utilisation. Si ce produit présente un défaut de matériel ou de main d’œuvre, Definitive Technology pourra, à sa discrétion, (a) réparer le produit, ou (b) remplacer le produit.
ES Precauciones de seguridad Normativa FCC INFORMACIÓN SOBRE CUMPLIMIENTO Nombre del producto: 5.1 Barra de sonido de sistema de cine en casa y sistema de subwoofer inalámbrico Número de modelo: Studio Advance y Studio Advance Subwoofer CONTIENE MÓDULO TRANSMISOR FCC ID: IPUJMDD FCC ID: IPUSTUADVBAR (BAR) FCC ID: IPUSTUADVSUB (Subwoofer) Este dispositivo cumple con la Part 15 de las normas de la FCC Rules.
configurar a una potencia de salida inferior si dicha función está disponible. Avisos de Industry Canada (IC), Canadá Este aparato digital de Class B cumple con la normativa canadiense ICES-003. Para reducir la interferencia de radio potencial a otros usuarios, el tipo de antena y su amplificación deben ser seleccionadas de tal forma que su potencia isótropa radiada equivalente (PIRE) no supere la permitida para una comunicación satisfactoria.
ENGLISH eléctrica o el enchufe están dañados, se ha derramado algún líquido o ha caído algún objeto sobre el aparato, el aparato ha estado expuesto a la lluvia o la humedad, no funciona normalmente o se ha caído. 15. El equipo puede utilizarse a una temperatura ambiente máxima de 45 °C. 16. No abra el equipo para reducir el riesgo de descarga eléctrica. Por motivos de seguridad, solamente está permitido que lo abran técnicos cualificados. 17.
Garantía limitada de 2 años Definitive Technology, LLC (“Definitive Technology”) garantiza al comprador minorista original que los altavoces inalámbricos de la marca Definitive Technology no tendrán defectos en los materiales ni de mano de obra en un periodo de dos (2) años, en condiciones y usos normales. Si se comprueba que este producto tiene defectos en los materiales o de mano de obra, Definitive Technology (a) reparará el producto o (b) reemplazará el producto, a su discreción.
1 Viper Way Sound United Europe, Vista, CA 92081 a division of D&M Europe B.V. 800 638 7276 Beemdstraat 11 www.definitivetechnology.
