User Manual Manual

4. Using The DDU-2000

Series in AED Mode

4 Using The DDU-2000 Series In AED Mode

This chapter describes how to use the DDU-2000 Series in AED Mode. In AED Mode, the unit analyzes the patient’s

rhythm and automatically charges if a shockable rhythm is detected. The DDU-2000 Series AED was designed for

simple operation, allowing the operator to focus on the patient. There are two primary control buttons and a display

screen. Concise and easily understandable voice messages and text and video prompts guide the operator through

the use of the unit.

The following sections describe in detail how to use the DDU-2000 Series AED. The basic steps for use are:

• Turn the DDU-2000 Series AED ON by pressing the ON/OFF button.

• Plug in pads connector into Pad Connector Socket on AED if not yet plugged in.

• Place deﬁbrillation pads on patient (follow instructions on pads package).

• Follow voice and display prompts.

• Press SHOCK button if instructed by the AED.

• Perform CPR when instructed.

4.1 Overview

Active Status Indicator (ASI) –

Indicates the current

status of the AED

Softkey Buttons

(Top, Center, Bottom) –

Buttons used to navigate

menus or select options

Pads Connector Socket –

Socket for pads connector

ON/OFF Button –

Turns AED on and off

Display Screen –

Displays video or

ECG, text prompts

and information

SHOCK Button –

Enabled/disabled by

software to allow the

user to discharge a

shock to the patient

Speaker –

Creates audio output

from device

DAC-E2510EN-BB