Product Manual

The date is now set and the user may use TOP or BOTTOM softkey buttons to navigate to other choices
in the menu.
Note: The factory default setting of the internal AED clock is Universal Time (GMT).

Volume Level
The Volume level option allows the user to set AED audio output to high, medium, or low volume.
Changing the volume level will not change the volume of the Active Status Indicator “beep.”
Before you begin: Be sure the unit is in Maintenance Mode.
To enter: Navigate to Volume level:
AED Main Menu Ú AED options Ú Volume level
What it does: The Volume level option allows the user to set AED audio to high, medium or low
volume. Once the Volume level option is selected, use the TOP and BOTTOM softkey buttons to
cycle through the different volume settings. When the desired volume selection is chosen, press the
CENTER softkey button to set that volume level. The AED will now use that volume setting for all audio
(except the volume of the Active Status Indicator “beep”). The user may use the TOP or BOTTOM
softkey buttons to navigate to other choices in the menu.
Note: The factory default setting of the volume level is “High.”

Audio Recording
The Audio recording option allows the user to enable or disable recording of event audio data to a
Defibtech Data Card (DDC card).
Before you begin: Be sure the unit is in Maintenance Mode.
To enter: Navigate to Audio recording:
AED Main Menu Ú AED options Ú Audio recording
What it does: The Audio recording option allows the user to enable/disable recording of event audio
data. Once the Audio recording option item is selected, use the TOP and BOTTOM softkey buttons
to select either enabled or disabled settings. When the desired selection is chosen, press the CENTER
softkey button to set the feature. The AED will now use that audio recording setting. The user may use
the TOP or BOTTOM softkey buttons to navigate to other choices in the menu.
Note: The factory default setting of the audio recording is “Disabled.”

Status Broadcast*
The Status broadcast option allows the user to enable or disable wireless (RF) transmission of
status data to an optional data receiver (contact your Defibtech distributor for details).
Before you begin: Be sure the unit is in Maintenance Mode.
To enter: Navigate to Status broadcast:
AED Main Menu Ú AED options Ú Status broadcast
What it does: The Status Broadcast option allows the user to enable/disable wireless (RF)
transmission of status data to an optional data receiver. Once the Status broadcast option item is
selected, use the TOP and BOTTOM softkey buttons to select either enabled or disabled settings.
When the desired selection is chosen, press the CENTER softkey button to set the feature. The AED
will now use that status broadcast setting. The user may use the TOP or BOTTOM softkey buttons to
navigate to other choices in the menu.
Note: The factory default setting of the status broadcast is “Disabled.”
*Status broadcast Maintenance Mode menu item only available on DDU-2000 Series units running
software version 2.7 or higher.
7. Maintenance Mode
44
DAC-A2510EN-BG