Use and Care Manual

7 HOMEDEPOT.com

Please contact 1-866-308-3976 for further assistance.

Mounting the coverplate

□ Line up the holes on the mounting bracket

(AA) with the holes on your junction box. Using

either (2) #6 screws (CC) or (2) #8 screws

(DD) (depending on size of the holes in your

junction box), attach the mounting bracket

(AA) to your junction box.

WARNING: Risk of electric shock. Disconnect power at

fuse or circuit breaker before installing or servicing.

Junction

box

Wiring the ﬁxture

□ Thread ﬁxture wires through coverplate

gasket (BB).

□ Connect ﬁxture black wire to house black wire

and ﬁxture white wire to house white wire

using wire nuts (EE) provided.

□ Connect house ground wire and ﬁxture ground

wire to the mounting bracket (AA) using the

green ground screw on the mounting bracket.

Mounting the ﬁxture

□ Attach ﬁxture (A) to the mounting bracket (AA)

using (2) #8 x 1-1/4 in. screws (FF) provided.

Be sure no loose wires remain sticking out

from underneath the coverplate. Insert the

decorative screw cover caps (GG) into the

screw holes on the coverplate for a ﬁnished

appearance.

□ Apply silicone caulk around the edges of the

coverplate to provide a watertight seal from

rain and moisture.

□ Turn on power at the main fuse/breaker box.

Installation