Installation Guide

5 HOMEDEPOT.COM

Please contact 1-866-308-3976 for further assistance.

BATTERY INSTALLATION

Step 1.Remove the front cover of the lamp head (A) by rotating the face counterclockwise. Pull the face out from

the housing to reveal the battery holder.

Step 2. A) To release the battery door, rmly press down on the door tabs simultaneously.

B) Insert 4 D-cell batteries (not included) into the light. Ensure the batteries are inserted so that the at ends are

making contact with the springs.

C) Attach the battery (not include) door by matching the tabs to the rectangular holes and then push down on the

door until it clicks into place.

Step 3. Line up arrows then turn the face of the light clockwise. Make sure the unit is closed by twisting until the

arrow symbol is pointing past the lock symbol to ensure weatherproof seal is tight.

Step1

Step2 A

Step2 B Step2 CStep3

Battery Door

NOTE:

• Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.

• Install batteries with polarity in correct position.

• Light may activate when batteries are inserted. Simply take light into a dark room. Allow batteries to settle, then test activation.

• If your light will not turn off, it means that it is time to replace the batteries.

Use only new alkaline D-Cell batteries with 1.5V rating.

Installation