SKU: 1008 992 390 MODEL: IS09a4505BRBKTH USE AND CARE GUIDE MOTION SECURITY LIGHT Questions, problems, missing parts? 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM THANK YOU We strive to continually create quality products designed to enhance your home.
Table of Contents Tools Required .......................................3 Hardware Included.................................4 Package Contents ..................................4 Installation ................................................5 Care and Cleaning ................................... 8 Troubleshooting ....................................... 8 Table of Contents......................................2 Safety Information....................................2 Warranty .................................
Warranty 3-YEAR LIMITED WARRANTY WHAT IS COVERED This product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date of purchase. Purchase receipt is required for all warranty claims. WHAT IS NOT COVERED This guarantee does not include repair service, adjustment and calibration due to misuse, abuse or negligence, or its entirety.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size. AA BB Part Description AA Anchor Quantity 2 BB Mounting bracket screw 2 PACKAGE CONTENTS Part Description Quantity A Lamp head 1 B Motion sensor 1 C Mounting base 1 A B C Installation 1 Determining the mounting location NOTE: mounted higher than recommended, aiming the sensor down will reduce the coverage area. □ □ Wall Mount Determine the mounting location – wall or eave mount.
Installation 2 BATTERY INSTALLATION Step 1.Remove the front cover of the lamp head (A) by rotating the face counterclockwise. Pull the face out from the housing to reveal the battery holder. Step 2. A) To release the battery door, firmly press down on the door tabs simultaneously. B) Insert 4 D-cell batteries (not included) into the light. Ensure the batteries are inserted so that the flat ends are making contact with the springs.
Installation (continued) 3 Mounting the light fixture Step 1. Remove the mounting base (C) by turning the thumbscrew counterclockwise. Lift the lamp head (A) out of the mounting base (C) and set aside. Step 2. A) Determine the mounting location and mark the pilot holes. Use a drill bit to create the pilot holes (if mounting to drywall, use the drywall anchors included with the screws). Use a hammer to tap the anchors(AA) into the pilot holes, before screwing in the mounting base(C).
Installation (continued) 4 Adjusting the lamp head WARNING: Risk of fire. Keep the lamp head at least 2 in. from combustible materials. If needed, gently grasp the lamp head (A) and tilt it up or down or side to side to adjust the light coverage area. 7 HOMEDEPOT.COM Please contact 1-866-308-3976 for further assistance.
Care and Cleaning □ □ □ Troubleshooting Problem The light will not come on. The lights stay on continuously. Possible Cause Solution □ Daylight turn-off (photocell) is in effect. □ Recheck after dark. □ The motion sensor is aimed in the wrong direction. □ Re-aim the motion sensor to cover the desired area. □ The motion sensor may be picking up a heat source, such as an air vent, dryer □ Reposition the motion sensor.
Questions, problems, missing parts? 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM Retain this manual for future use.
