Item #1001620687 Model #HD-2703-WH HD-2703-BZ USE AND CARE GUIDE MOTION SECURITY LIGHT Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this motion security light. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents........................................2 Safety Information......................................2 Precautions Warranty.....................................................2 5-Year Warranty......................................2 Specifications.............................................3 Pre-Installation...........................................3 Planning Installation...............................3 Tools Required........................................
Warranty 5-year warranty Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com. Specifications Detection Range Up to 70 ft. (21m) - Varies with surrounding temperature Sensing angle Up to 270° Time delay 1, 5, or 10 minutes HI-LO timer OFF, Dusk-to-Dawn, Seasonal adjusted timer mode Operating modes Auto, Manual, Eco, Smart Pre-Installation PLANNING INSTALLATION Before installating the light fixture, ensure that all parts are present (see Hardware Included on page 4).
Pre-Installation (continued) hardware included NOTE: Hardware shown not to scale AA BB DD EE FF HH II M4 X 1.6” CC M4 X 1.9” GG Part Description AA Wire connector Quantity 2 BB Connector wire (black and white) 1 CC Gasket 1 DD Mounting bracket 1 EE Mounting bracket screw 1 2 FF Mounting bracket screw 2 2 GG Mounting bracket screw 2 (M4 X 1.6”) HH Mounting bracket screw 2 (M4 X 1.9”) II Decorative nut 2 4 151209-IQA HD-2703-FA.
Pre-Installation (continued) Package Contents B A C Part Description Quantity A Main body 1 B Lamp head 2 C PIR lens 1 MOUNTING LOCATIONS □ □ Determine the mounting location - a wall or under an eave. Position lamp head (B) in the general direction of the desired light coverage and tighten the screws (3) if needed. 1 2 2 1 Wall Mount A B Eave Mount 3 3 □ C Rotate the body up to change from wall mount to eave mount as per drawing below. 5 HOMEDEPOT.
Installation 1 Installing the Mounting Bracket WARNING: Turn the power off at the circuit breaker or fuse. Place tape over the circuit breaker switch and verify power is off at the light fixture. □ □ □ NOTE: Firmly pull on the mounting bracket to verify it is securely mounted to the junction box. If necessary, use the screws that were removed from the existing light fixture. Remove the existing light fixture.
Installation (continued) 4 Mounting the Light Fixture □ □ □ Plug the connector (BB) into the connector on the back of the fixture (A). Align the main body (A) to the mounting bracket screws (GG) and slide the light fixture over the screws. Firmly push the light fixture against the junction box, so the mounting bracket screws come out through the holes on the front of the light fixture. Attach decorative nuts to the mounting bracket screws and tighten.
Operation (continued) 3 Setting the Sensor for Testing 2 Sensor Head Adjustment □ □ □ Rotate the motion sensor (C) so the controls face toward the ground. The sensor can be tilted up and down, as well as rotated left and right. □ Turn on power. Conduct a walk test to adjust the sensor coverage area. Sensor will be in TEST mode automatically for 2 minutes. Lights will come on for approximately 2-3 seconds in TEST mode.
Operation (continued) 6 Adjust the Dusk Learn 7 Adjusting the Time ECO mode: If desired, you can set the level of darkness at which the sensor becomes active and at which the Hi-Lo feature comes on in the “Lo” accent mode. □ □ □ Press once: To learn the current level of brightness and set this as your new “Dusk” level.
Care and Cleaning □ To prolong the original appearance, clean with clear water and soft, damp cloth only. □ Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the finish. This is not a defect in the finish and will not be covered by the warranty. □ Do not spray with a hose or power washer. Troubleshooting Problem The light will not come on. Possible Cause □ □ □ □ □ The light comes on during the day.
Troubleshooting (continued) Problem The lights stay on continuously. Possible Cause □ □ □ The lights flash on and off. Solution A lamp is positioned too close to the motion sensor or pointed at nearby objects that cause heat to trigger the motion sensor. The motion sensor may be picking up a heat source like an air vent, dryer vent, or brightly painted, heat-reflective surface. The motion sensor is in manual mode. □ Reposition the lamp away from the motion sensor or nearby objects.
Questions, problems, missing parts? Before returning to the store, call Defiant Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-866-308-3976 HOMEDEPOT.COM Retain this manual for future use. 151209-IQA HD-2703-FA.
