Instructions / Assembly

8
Operation (continued)
3
Setting the sensor for testing
NOTE: When the “TIME” control is set to the “TEST”
position, the light xture will operate during the day or
night. The light will stay on for 8 seconds after all motion
is stopped.
Ƒ Turn the “TIME” control to the “TEST” position.
Ƒ Turn the “SENSITIVITY” control to the “MIN”
position.
NOTE: The motion sensor will need to completely warm
up (60 seconds) before beginning the setup process.
MIN MAX
SENSITIVITY
10S
10MIN
TIME
TEST
4
Adjusting the motion sensor
detection zone
Ƒ Perform a “walk test”: walk in an arc across
the front of the motion sensor (C).
Ƒ Watch the light. The light will come on and the
red LED will ash indicating motion has been
detected.
Ƒ Stop, wait for the light to turn off, and then
begin walking again.
Ƒ Continue this process until the detection zone
has been established.
Ƒ If needed, gently grasp the motion sensor (C)
and move it from side to side or up and down
to adjust the detection zone.
5
Adjusting the SENSITIVITY
control
Ƒ To increase the sensitivity, turn the
“SENSITIVITY” control toward the “MAX”
position.
Ƒ To decrease the sensitivity, turn the
“SENSITIVITY” control toward the “MIN”
position.
NOTE: The motion sensor (C) is more sensitive to motion
moving across the front of the sensor. The motion sensor
(C) is less sensitive to motion moving directly toward the
front of the sensor.
NOTE: The higher the “SENSITIVITY” setting, the greater
the possibility of false triggering. To reduce false triggering,
turn the “SENSITIVITY” control toward the “MIN” setting.
MIN MAX
SENSITIVITY
TEST
10S
10MIN
TIME
6
Adjusting the TIME control
NOTE: The “TIME” control determines the amount of
time the light will stay on full bright after all motion has
stopped. When the “TIME” control is set between 10S and
10MIN, the light will only come on during the night.
Ƒ To increase the time, turn the “TIME” control
toward the “10MIN” position.
Ƒ To decrease the time, turn the “TIME” control
toward the “10S” position.
MIN MAX
SENSITIVITY
TEST
10S
10MIN
TIME
C
C
C
C