Instructions / Assembly

5 HOMEDEPOT.com

Please contact 1-866-308-3976 for further assistance.

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A Bulb holders 2

B Canopy 1

C Motion sensor 1

D Shells 2

MOUNTING LOCATIONS

Ƒ Determine the mounting location – a wall or under

an eave.

Ƒ Position the bulb holders (A) in the general

direction of the desired light coverage and

tighten the lock nuts (1) and the screws (2).

Ƒ If needed, lift the motion sensor (C) up and

rotate it so the controls face the ground after

installation. Tighten the clamp screw (3) when

done. Do not overtighten.

NOTE: If the motion sensor (C) pops out of the ball joint,

loosen the clamp screw (3), push the motion sensor (C)

back into the ball joint, and tighten the clamp screw (3). Do

not overtighten.

Wall Mount

Eave Mount