Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-866-308-3976 for further assistance.
DD
Installation (continued)
5
Attach the light fixture to the mounting bracket
□ Install the light fixture base (B) to the mounting bracket (FF) using the long mounting screw (AA) provided.
□ Make sure no wires are visible outside of the light fixture.
□ Insert the rubber plug (DD) into the hole on the light fixture base (B) for a finished appearance.
□ Position the photocell (C) facing down.
6
Seal the light fixture
□ Apply silicone sealant (not included) to the
edges of the light fixture base (B) so that the
fixture can be completely waterproof and
dustproof.
A
7
Adjust the light heads
□ Move each light head (A) into the desired
position with your hand, as needed.
AA
B
C
B
A
A
>45°
NOTE: For best performance, the angle
between the light head and the wall should
be larger than 45°.