Instructions / Assembly

ManualsBrandsDefiant ManualsElectrical15-Amp 7-Day Plug-In Digital Polarized Timer

THANK YOU

We appreciate the trust and con dence you have placed in

De ant through the purchase of this indoor digital timer. Visit

us online to see our full line of products available for your home

improvement needs. Thank you for choosing De ant!

Operating Instructions (Continued)

Programming ON/OFF Times

NOTE: While programming, if no button is pushed for 10

seconds, the timer will return to the clock display.

Press PROGRAM (2) once to begin programming. The screen will

show 1 ON --:-- and all days of the week.

Press DAY (6) to select the days of the week the timer will operate:

□ MO TU WE TH FR SA SU

□ MO>TU>WE>TH>FR>SA>SU> (to select single days only)

□ MO TU WE TH FR

□ SA SU

□ MO TU WE TH FR SA

□ MO WE FR

□ TU TH SA

□ MO TU WE

□ TH FR SA

Press HOUR (4) to select the hour the timer will activate. Note the

AM/PM in the bottom right corner of the display.

Press MINUTE (5) to select the minute the timer will activate.

Press PROGRAM (2) once more. The screen will show 1 OFF --:-- and

all days of the week. Repeat the previous steps to program the times

for the timer to turn OFF for program 1.

Press PROGRAM (2) once to move to Program 2 (2 ON --:--). Repeat the

previous steps to program the ON/ OFF times for Program 2, if you

want to program additional ON/OFF times.

Once programming is complete, press CLOCK (1) to return to Clock

mode.

NOTE: Press CLOCK (1) at any time to  nish programming

and return to Clock mode. The timer can run up to 20 programs

simultaneously.

Using the ON/OFF functions

CAUTION: DO NOT PLUG IN MORE THAN THE RATED LOAD

(SEE RATINGS). Find the total watts being used: If watts are not

marked on the appliance, multiply ampere rating (on nameplate)

by 125 volts to determine equivalent watts. For lamps with

multiple bulbs, add the wattage on the bulbs.

NOTE: This is a POLARIZED device. It has a polarized plug and

one polarized outlet.

Plug the device that the timer will control into the timer, and connect

the timer to a power source.

Ensure the device is switched ON for automatic control. (The timer will

not turn the device ON if the device is switched OFF.) The device will

now turn ON and OFF at the programmed times.

NOTE: The lamp or device will not come on until the next

ON time is triggered. To manually turn the device ON and start

the program, cycle the ON/OFF button until the device turns on

and the display reads AUTO ON. You can also use the ON/OFF

button to override the timer and set to ON (always on) or OFF

(always off).

NOTE: While in programming mode, the programmed time can

be canceled or resumed by pressing the RECALL (3) button.

USE AND CARE GUIDE

INDOOR DIGITAL TIMER

RESET

Questions, problems, missing parts? Before returning to the store,

call De ant Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-866-308-3976

HomeDepot.com

Item #458-148

Safety Information

FCC NOTE

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modi cations to this equipment. Such modi cations could

void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. This Class

B digital apparatus complies with Canadian ICES-003. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: RISK OF ELECTRIC SHOCK:

Plug directly into an electrical outlet

Do not use in wet locations

Use indoors only

Unplug timer before cleaning

Keep children way

WARNING: RISK OF ELECTRIC FIRE:

Do not use to control appliances that contain heating

elements such as cooking appliances, heaters, and irons

Do not exceed electrical ratings

Do not use with extension cords

Operating Instructions

Setting up the timer for the ﬁ rst time

If the LCD screen is displaying numbers, you are ready to program and

can proceed with these steps. If the screen is blank, plug in the timer

and leave for two hours to charge the internal battery before programing.

Use a toothpick or sharp pencil to push the RESET (8) button. The

screen will go blank brie y and then display 12:00 AM.

Press and hold CLOCK (1) throughout the time and day setting

process.

Press HOUR (4) to adjust the hour. Take note of the AM/PM on the

bottom right of the display.

Press MINUTE (5) to adjust the minute.

Press DAY (6) to adjust the day.

You can now release the CLOCK button.

SA SU

PROG

AUTO

OFF

CTD

RND

+1h

OFF

LCD display

Ready to set

AUTO

RATINGS

125 VAC, 60Hz

15 A General Purpose / Resistive

1250 W (10A) Tungsten

½ HP

Product Description

Timer display shown in standard Clock mode:

1. CLOCK (DST): Hold and press HOUR, MINUTE, or DAY buttons to set time

of day. In Clock mode, hold for 5 seconds to move forward or back an

hour (Daylight Savings Adjust).

2. PROGRAM: Press to enter timer Programming mode.

3. RECALL: In Programming mode, press to cancel or restore ON/OFF

time shown.

4. HOUR (RND): While holding CLOCK button, press to set hour (time).

While in Programming mode, press to set hour for ON/OFF times. While

in Clock mode, press and hold 3 seconds to activate random security

feature.

5. MINUTE: While holding CLOCK button, press to set minute (time). While

in Programming mode, press to set minute for ON/OFF times.

6. DAY: While holding CLOCK button, press to set day of the week. While

in Programming mode, press to scroll through options for days of the

week.

7. ON/ OFF: (push to scroll) ON=Always ON, Auto=Timer is active,

OFF=Always OFF

8. RESET: Press and hold to reset all the programs permanently.

Using the ON/OFF functions

There are four settings for the timer; press the ON/ OFF button (7) to select

the desired option:

ON – Timer outlet is always ON (Overrides Programming).

AUTO ON – Timer outlet is currently ON and will turn OFF at next

programmed OFF time.

OFF – Timer outlet is always OFF (Overrides Programming).

AUTO OFF – Timer outlet is currently OFF and will turn on at the next

programmed ON time.

NOTE: The timer program will control the device if set to

AUTO ON or AUTO OFF.

RESET

Using the Random Security (RND) and Daylight

Savings Time (DST) features

The Random Security program option will turn lights ON and OFF using

the programmed times + or - 30 minutes, giving the home a more lived

in appearance while occupant is away.

Press HOUR (RND) (4) for 5 seconds to activate the random feature.

The display will show the RND icon above the seconds on the

display.

Press HOUR (RND) (4) for 5 seconds to deactivate the random

feature. The display will not show the RND icon.

To use the Daylight Savings Time easy adjust feature, push CLOCK (1) for

5 seconds to advance the current time 1 hour (+1h icon should appear

on the lower left corner of the display). Repeating this process will

decrease the time by 1 hour (the +1h icon will disappear).

Questions, problems, missing parts? Before returning

to the store,

call De ant Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-866-308-3976

HOMEDEPOT.COM

SA SU

PROG

RESET