Operating instructions

6.4 Reassembly of the unit

CAUTION!

BeforereassemblingtheDefensorPH28checkallcomponentsforpossibledamage.Donotreuse

damagedpartsbutreplacethembeforereassemblingtheunit

Reassembletheunitasfollows:

Install the vaporizer mat and the

retaining mesh in the humidica-

tion drum.

Slidethehumidicationdrum(with

the internal geared wheel facing

backwards) together with the base

tub into the unit.

Place the coarsedustlterwith

the blue side facing upwards (fac-

ing to the centre when mounted) or

theQuattrolterwiththeuffy

side facing the bottom (facing

outwards when mounted) in the

air intake grills, then mount the

retainerframe.

Mount the air intake grill, then tip

the swivel plate down.

Slide the water tank cart into the

unit.

Pressthe lockmechanismof the

handleonbothsidesofthecart(the

handle slides down), then tip up the

cart until the lock engages.

Important! After reinstalling the

water tank wait by the unit until the

llingsoundstops.