Operating instructions

20
5.4 Unit settings (normal operating mode)
5.4.1 Setting the desired humidity value
modify
conrm
cancel
Note:Thereferencehumidityvaluecanbemodiedonlyifprogrammodeisdeactivated(seechap-
ter 5.5).
Settingrange: 30...90%rH
Factorysetting: 45%rH
Notesonsetting: Theoptimumreferencevaluedependsonvariousfactors.Forapartmentswe
recommendavalueof40–45%rH.
Note:Afterinitialcommissioningorreplacementof thevaporizermatthehumidicationperform-
ance of theDefensorPH28/PH28A will be slightly reducedbecause the evaporator mat takes a
fewdaystobecomefullysaturatedwithwater.Maximumperformanceisavailableafteroneweek,
approximately.
Furthermore,thehumidicationperformancedependsontheambienttemperature.
30...90%rH
Standard operating display
(see chapter 5.4.2)
Set value
45%rH
Set value
New Value
Set value
Old Value
Set value
45%rH