Operating instructions

4.3 Choose location

PleaseobservethefollowingnotesforthecorrectpositioningoftheDefensorPH28/PH28A:

– Placetheunitonasolidhorizontalsurface,ifpossiblefree-standingandfreelyaccessible(observe

minimal distances).

– A mains socket should be located close to the unit.

– Toensuretheentirevolumeofairisfullyrecirculated,donotplacetheunitinrecessedcompart-

ments, closed corridors, behind curtains, etc.

– Donotplaceanyobjectsontheunit(performancereduction).

– Continuousdirectsunlightisharmfulfortheunitandcanaffectthecorrectfunctionoftheinte-

gratedhumiditysensor.Thereforedonotexposetheunittocontinuousdirectsunlight.

– The unit must not be installed in hazardous loca tions and in rooms where water splashes may

occur.

min. 100 mm

min. 150 mm

min. 400 mm