Product Manual

38
AUTO UPGRADE
Set the DVR to automatically update the firmware. The DVR must be connected to the internet for this feature
to work.
Auto Upgrade: Set the DVR to automatically update the firmware.
Check for Updates: Enable the DVR to automatically check for firmware updates.
Detect: Manually search for an update.
Upgrade: Update when found.
To search for a firmware update, follow the steps below.
1. Select Check for updates to allow the DVR to automatically check for updates
2. Select Detect to search for updates.
3. Once the update is located, select upgrade. Once you have selected this, it cannot be stopped.
4. Select Save to save your changes.
Default: Restore the settings on this page back to default.
Save: Save the settings made on that page.
Cancel: Revert any changes, and exit the menu.