Product Manual

37
EVENTS
Determine what will happen when an event occurs on the DVR.
Event Types:
• Disk Full: The hard drive is full and has stopped recording.
• Disk Error: There is a hard drive error, and recording has stopped.
• Video Loss: A camera has experienced video loss.
Enable: Check to receive an event notification.
Show Message: Check to receive a message on the Live View screen.
Send Email: Check to receive an automated email alert.
Buzzer: Select to set the type of buzzer notification. The options are:
• OFF
• 10 S
• 20 S
• 40 S
• 60 S
To be notified of an event, follow these steps:
1. Check Enable.
2. Select Show Message to receive a message on the live view screen. Select send email to receive
email notifications. The DVR must be connected to the internet to send emails.
3. Set the time of the DVR internal buzzer.
4. Select Save to save your changes.
Default: Restore the settings on this page back to default.
Save: Save the settings made on that page.
Cancel: Revert any changes, and exit the menu.