Product Manual

17
CAPTURE
Set the DVR to capture still images.
Capture:
Channel: Edit the capture settings for the selected channel.
Auto Capture: Select Enable/Disable to automatically capture snapshots based on the settings entered.
(i.e. constant recording, motion only recording)
Stream Mode: High Quality Stream or Standard Quality Stream.
Normal Interval: The frequency in which images are taken when in constant capture mode.
Alarm Interval: The frequency at which images are taken when in motion capture mode.
Manual Capture: Selecting Enable will allow you to manually take a snap shot.
Copy CH1 to All: Copy these settings to all channels.
Default: Restore the settings on this page back to default settings.
Save: Save the settings made on that page.
Cancel: Revert any changes, and exit the menu.