Instruction manual

STEALTH1

After start up, the system will automatically enter live monitoring mode, with the following status indicators:

1. Date and Time: Current DATE AND TIME

2. Record Status: MANUAL RECORD settings

Record Resolution

640 Please refer to RECORD SETUP for VIDEO

480 SIZE setup instructions.

Record Quality

MQ Please refer to RECORD SETUP or VIDEO

QUALITY setup.

3. SD Card Status:

No SD card installed or the card is malfunctioning  Reading SD card

SD card is functioning normally

MONITORING MODE

1. To turn the device ON, connect the power adapter or insert batteries into the battery compartment.

2. Slide the POWER SWITCH on the top of the device to the ON position.

3. To view the menus and adjust settings, you will have to attach the included RCA cable to the VIDEO OUTPUT of the

COVERT DVR, and connect it to the VIDEO INPUT on the back of your television.

4. After powering on the system, it will automatically enter live monitoring. If the system was previously set to

SCHEDULE or MOTION, it will automatically return to that recording mode.

5. After a power outage, the system will reboot and return to the previously set recording mode.

1. The SD CARD icon

shown on the status line, indicates that the SD CARD is operating normally.

2. If there is a problem or error with the SD CARD, the PLAY, MENU, and RECLEDs will ash quickly. If this happens,

please re-format the SD card before proceeding (all saved video will be lost).

• To quickly format the SD CARD, turn the DVR o. Then hold the REWIND and FAST FORWARD buttons (at

the same time) and move the switch on the DVR to the ON POSITION. A "Format OK" message will be displayed

when the SD card is successfully formatted

3. When the SD CARD is recording video successfully, the RECORD LED will be lit.

SD CARD INFORMATION

POWERING ON

NOTE: Each time the unit is powered on, the system will auto-detect the SD CARD. When the RECORD LED is

ashing, this indicates that the SD CARD is currently being read. ALL LEDs will ash when a memory

card error is detected.