Instruction manual

STEALTH1
3
6
10
11
5
7
14
13
12
9
8
1. Pinhole Camera: The PINHOLE CAMERA is located in this small hole
2. POWER Switch: Always stop recording by pressssing the STOP button rst BEFORE putting
the POWER button in the OFF position
3. SD Card Slot: Supports SD and SD-HC memory card
4. VIDEO OUT Jack (RCA): To view footage, use the RCA video output to connect to your television
Connection to a TV is NOT required when recording
5. NTSC/PAL Switch: NTSC is the video system used in North America. PAL is used in Europe and
parts of Asia
6. FULL STOP/OVERWRITE: Select whether to overwrite the recorded SD card or stop recording
completely when the card is full. When you select “Overwrite”, the oldest
stored video will be recorded over rst.
7. POWER Input: Connect POWER CORD here
8. MENU Button: Opens and exits the menu
9. RECORD & STOP Button: Starts and stops recording; stops playback of recorded footage
10. PLAY & PAUSE button: Play and pause playback of recorded footage
11. REVERSE & FORWARD Buttons: Allows you to navigate through the menu options, and reverses and
forwards through footage
12. Mounting Hole: Attach the mounting bracket here
13. Flush Wall Mount Holes: Allows you to mount the camera directly onto the wall
14. Battery Compartment: Camera can be battery powered so the system is completely wireless
BUTTONS AND CONNECTIONS
Note: When changes are made to NTSC/PAL or STOP/OVERWRITE functions, you must shut o and
restart the unit to save your changes.
1
43
2
IMITATION MOTION SENSOR - FRONT
BACK
TOP