Instruction manual

STEALTH1

There are three dierent recording modes available: MANUAL, CONTINUOUS, and MOTION DETECTION.

• MANUAL Record

Start and stop recording anytime manually. Press theRECORD button to start recording. Press again to stop

recording.

• CONTINUOUS Record

Schedule a START and STOP time to record; the DVR will CONTINUOUSLY record during the preset time.

• MOTION DETECTION Record

Preset a time to record only when movement is detected. MOTION DETECTION will START RECORDING when

movement is detected and exceeds a preset motion detection threshold. (See MOTION DETECTION

SETUP Pg. 12 for more information)

STOP RECORD

• Pressing the RECORD button while in SCHEDULE MODE will interrupt recording and switch to

MANUAL RECORD.

• Pressing the RECORD button again, and it will return you to SCHEDULE mode (if a schedule is set).

START/STOP RECORDING:

Manual Record

To start MANUAL recording press the RECORD button. Pressing the RECORD button again will stop MANUAL

recording and resume to SCHEDULE mode.To completely stop all recording, you must shut the schedule record o.

Motion Detection Record

Once motion detection has been set in the schedule record section of the menu, the DVR will start recording every

time motion is detected. To completely stop motion detect recording, you must shut the schedule option o.

Continuous Record

Once continuous record has been set in the schedule record section of the menu, the DVR will start recording using the

continuous record settings. To completely stop recording, you must shut the schedule option o.

If there are multiple recording modes set to record at the same time, the DVR will record using one mode, based on

the level of importance.

The order of importance is:

1. Manual Record

2. Motion Detection

3. Continuous Record

Note: For more information see RECORD SETUP on Pg 13

RECORDING MODES