Specifications

MAINTENANCE
Check air cleaner dump valve
The dump valve provides an automatic drain for the air
cleaner and is fitted in the base of the air cleaner
support bracket.
7. Squeeze open the dump valve and check that the
interior is clean.
Also check that the rubber is
flexible and in a good condition.
8. If necessary, remove the dump valve to clean the
interior. Fit
a new valve if the original is in a poor
condition.
Fit air cleaner
9. Fir air cleaner canister and secure with the clips.
10. Connect the air cleaner hose.
RENEW AIR CLEANER ELEMENT - VS engine
1. Unscrew the two air cleaner strap retaining nuts.
2. Disconnect the air cleaner hose.
3. Remove the engine breather hose.
4. Withdraw air cleaner canister.
5. Unscrew element wing nut and washer and remove
filter seal.
6. Remove and discard the element. DO NOT
attempt to clean the element, fit a new one during
reassembly and secure with the wing nut.
Check air cleaner dump valve
7. Squeeze open the dump valve and check that the
interior is clean.
Also check that the rubber is
flexible and in a good condition.
-
8. If necessary, remove the dump valve to clean the t . ;,
interior. Fit a new valve if the original is in a poor
condition.
Fit air cleaner
9. Fit a new element and reassemble the air cleaner.
10. Fit the air cleaner canister.
11. Fit the breather hose.
12. Fit the air cleaner hose.
13. Secure with the retaining straps and nuts.
CLEAN FUEL LIFT PUMP SEDIMENT BOWL -
Petrol engine - early vehicles
1. Remove the bowl by slackening the thumb screw
2. Remove and clean the filter gauze in clean petrol.
r;
3. Ensure that the sealing washer is in good condition. .s/
4. Replace gauze and refit the bowl.
5. Prime the pump by operating the hand lever.
and swinging the retainer
to one side.
ST1068M
12