Specifications
GENERAL
SPECIFICATION
DATA
104
I
/*:-
*
SUSPENSION
-
All Models
Type
.................................................................
Front ................................................................
Rear
.................................................................
6
:”**
-
Coil springs controlled by telescopic dampers front and
rear
Transverse location
of
axle by Panard rod, and fore and
aft location by two radius arms
Fore and aft movement inhibited by two tubular trailing
links. Lateral location of axle by a centrally positioned ‘A’
bracket bolted at the apex to a ball joint mounting. An
optional levelling unit is positioned between the ball joint
and upper cross member
BRAKES 2.25 Petrol and
V8
Engine
System
..............................................................
Direct acting servo assisted dual braking system with
Girling tandem master cylinder and pressure differential
warning actuator, combination valve, or G. valve
Footbrake
-
All Models
Front
.............................................................
.
Disc diameter
...............................................
Number
of
pistons per wheel ............................
Total lining area ............................................
Lining material..
............................................
Rear
..............................................................
Drum diameter
.............................................
Total lining area
............................................
Brake drum width..
........................................
Lining material..
............................................
Lockheed Disc
300
mm
(11.81
in)
4
232
cm2
Don 230
Girling single cylinder drum brake
280
mm
(11
in)
493 cm2
63.9”
Ferodo 2629
Handbrake
-
All
Models
Type
..............................................................
Transmission drum brake cable operated
Drum diameter
................................................ 254 mm
(10
in)
Lining material..
...............................................
Don 269
BRAKES
-
2.25 and 2.5 litre Diesel engine
System
..............................................................
Direct acting servo assisted dual braking system with
Girling tandem master cylinder and pressure differential
warning actuator, combination valve, or G. valve.
Servo
assistance initiated by an engine driven air
evacuation pump and sustained by a vacuum tank
(vacuum tank deleted
on
2.5)
Evacuation pump
-
2.25 litre Diesel
Maximum speed
...............................................
5000 rpm. Belt drive
Oil capacity
.....................................................
40 cm3 (2.4 in3) SAE
15W
-
50
Evacuation pump
-
2.5 litre Diesel
Maximum speed
...............................................
Lubrication .....................................................
4000
‘pm. Gear drive from camshaft
Oil
feed via skew gear
.Minimum
vacuum
!eve!
at
2500
!pn
......................
0,8
bar
15