Instruction manual

DFDVR2 45
PTZ / SAVE
1. Set Path to Save Recorded Images
Set a path to save the video clips. If you do not specify a path, the program will save all
les to its default location.
2. Run in Full Screen Mode
Check the box to enlarge the interface to fullscreen.
3. Circular Monitoring Interval
Set up a sequential switch interval. This will determine how fast the cameras cycle
between each other.
4. Scan Rate
Select a Fast forward (FF) speed of remote Playback.
6-3-5 PTZ CONTROL
1. ZOOM
Use + / - to adjust PTZ Zoom IN/OUT.
2. FOCUS
Use + / - to adjust PTZ Focus.
3. PAN/TILT CONTROL
Click the direction buttons to control Pan and Tilt.
4. PTZ ID
Show the PTZ camera that is under control.
5. +/-
Click +/- to select a PTZ ID.