Wireless 2K IP Camera Product Manual IP2KCB1
THANK YOU Congratulations on your Defender 2K Wireless IP Camera purchase! You’ve made the best choice to protect what you value most We take our product performance and quality very seriously and we want you to be completely satisfied with your purchase. If you have any questions, or to get the most our of your product, visit www.defender-usa.com first for additional product features information, specifications or assistance with setup.
WARRANTY TERMS DISCLAIMERS 1. DEFENDER® products are guaranteed for a period of one year from the 1. Wireless cameras require a wired connection to a power outlet. date of purchase against defects in workmanship and materials. This 2. When viewing remotely: Video quality and connectivity is dependent on 2. warranty is limited to the repair, replacement or refund of the network performance. An upload speed of 5Mbps is recommended for purchase price at DEFENDER®’S option.
SAFETY WARNINGS • We recommend using an Uninterruptable Power Supply (UPS): Connecting to a UPS allows for continuous use during a power outage. The remaining power duration will depend on the UPS used. • Use the Power Supply/Adapter provided: Do not use these products with a power supply that exceed the specified voltage.
COMPLIANCE STATEMENTS FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TABLE OF CONTENTS Thank You Support Warranty Terms Disclaimers Safety Warnings Compliance Statements What’s Included Functions Connecting Your Camera Getting Started (Mobile App Setup) Camera Installation Camera Reset Specifications FAQs 5 1 1 2 2 3 4 6 7 8 9 11 12 13 14
WHAT’S INCLUDED • • • • • • 1 X Defender Wireless 2K IP Camera 1 X Wireless Wi-Fi Camera Antenna 1 X Waterproof Connector 1 X Camera Power Supply / Adapter (3 meters / 10 ft) 1 X Camera Mounting Hardware 1 X SD Card (need size) • • • 1 X Need More/Accessories Sheet 1 X Quick Start Guide 1 X Window Decal/Warning Sticker • • Free Lifetime Access to our Mobile App Free Lifetime Technical Support 6
BUTTONS & FUNCTIONS 1. Reset Button 2. Indicator Light 3. Lower Cover 4. Micro SD Card Slot 5. Indicator Light 6. Waterproof Ring 7. Antenna 8.
CONNECTION YOUR CAMERA We recommend testing your camera indoors before installing. 1. Attach the waterproof ring and antenna. 2. Remove the lower cover. This requires a small Philips head screw driver. 3. Insert the SD Card into the Micro SD Card Slot until it clicks into place 4. Replace the lower cover. 5. Connect the power adapter to the camera and plug into a power outlet. The solid green light on the camera indicates the camera is connected to your Wi-Fi network.
GETTING STARTED (MOBILE APP SETUP) Before you start: • You will need access to your email – the time sensitive Verification Code will be emailed • You will be asked to create a password for the App – think of a password that is easy for you to remember but hard for others to guess • You will need your Wi-Fi password (if applicable) during setup • Download the Defender SmartSignal App from your app store • Tap Sign-up to setup the App • Tap the Country to make another selection OR • Tap Next • Tap to ente
GETTING STARTED (MOBILE APP SETUP) • The camera SN will appear on the screen • Tap Next • Tap Single Camera Setup to add the camera • Place your mobile device within 30 cm of the camera • Tap Next • Tap to enter you Wi-Fi password (if required) • Tap Next • The Add successfully message will appear when the camera has been added to your Account • Tap Start Preview to open the app in Live View • Check the Live View to make sure your camera is connected • Change the camera definition to SD (Standard) – t
CAMERA INSTALLATION 1. Determine the area you want to cover and plan out where the camera should be installed. Make sure there is access to a power outlet in this area. 2. Place the camera in the desired area and check your Defender SmartSignal app to make sure the camera is live steaming. If it is not streaming, you may need to move it closer to your Wi-Fi router. 3. Use the hardware provided to install your camera and ensure that it is secure against the wall or ceiling (not hanging down). 4.
CAMERA RESET If the camera will not connect or has lost connection and will not pair, you will need to reset it. The camera reset is on the bottom of the camera behind the lower cover. To remove the cover, you will need a small Phillips head screw driver. Camera Reset 1. Remove the lower cover. 2. Press and hold the reset button until the light flashes RED. 3. The light will stay RED while the camera resets (this can take a few seconds). 4. When the light turns GREEN the camera is reset. 5.
SPECIFICATIONS Model Number IP2KCB1 IR LED Quantity 18 Image Sensor 4.0MP, 1/3" CMOS Field of View (FOV) 127⁰ Diagonal Housing Metal Night Vision Range Up to 30M (100ft) Effective Pixels 2688 * 1520 Power Supply DC 12V, 2.0A Microphone No Electronic Shutter Video Frame Rate Up to 2K (4MP) @ 30fps Speaker No Lens 2.8mm Power Comsumption Max 5.5W (IR on) Synchronization Internal Working Temperature -30°C~+60°C Min.
FAQs Is this camera completely wireless? The Wireless 2K IP Camera is wireless in terms of how it connects to your modem/router. This means that it connects in a similar way a smartphone or laptop computer connects to your internet using Wi-Fi. This camera does require a power connection using the power adapter provided. Which NVR systems is this camera compatible with? The Wireless 2K IP Camera is compatible with the Defender 2K Wireless Surveillance System only.
Protect what you value most™
