User Guide

Need Help? Visit DefenderCameras.com/support
8
Step 2: Position and Install Your Camera
Important: Before mounting your camera,
use the app to test your Wi-Fi strength and
video feed. Plug the camera in the area you’ll
be monitoring and view your footage to
ensure you have a clear, uninterrupted view.
To check your network signal strength,
tap > Tool > Wi-Fi Detection Tool >
Wi-Fi Detection
Note: Cement walls, exterior nishes, and
thick insulation can signicantly aect Wi-Fi
signal strength.
2.5 m
(8 ft)
Using the recommended tools, install your
camera in a preferred place, at a height
where you can clearly see faces. Make sure
there is a nearby power outlet.
Using a Phillips #2 screwdriver, loosen the
screw and adjust the position of your camera
to ensure you get the best video view. Tighten
the screw when nished. You can also adjust
the antennas if required.
Tip: Your Guard Pro Camera comes with a 25ft.
extension cable, giving you 35ft. to mount your
camera from the power outlet.
IMPORTANT:
The Camera Power Supply is
NOT waterproof.