Instruction manual

SN501-16CH
18
1. Camera Setup
2. Motion Setup
3. Record Setup
4. Alarm Setup
5. HDD Management
6. Network Setup
7. Backup Setup
8. System Setup
9. Exit
Note: The button works as the enter key. This must be pressed to save changes. The works as the escape button, and
when pressed will exit the screen and not save any changes.
The main menu consists of nine options:
MAIN MENU
As you navigate through the Menu of the DVR, you will notice that most elds are adjustable. If the Menu setting has to the right of it, you can
adjust the value by either using the left and right directional buttons, or scrolling up or down with the mouse wheel. If the Menu setting has
next to it, you can select this button by pressing ENTER or by clicking on the SET button with the mouse. Clicking SET will enter a sub menu which
will allow you to adjust sub-settings for the DVR.
To call up the Main Menu:
The Main Menu can be called by 2 dierent options:
Option 1:
1. Press the Menu button the DVR front panel or on the remote control.
Option 2:
1. Scroll the mouse to the bottom of the screen to reveal Pop Up Menu Bar.
2. Click the to call up the Main Menu.
ADJUSTING REMOTE CONTROL FOR OTHER DVRS
If you have other DVRs, you can set the remote control to work with multiple DVRs, this is good if you have more then one DVR hooked up in your
home or business.
Setting Remote for other DVRs:
1. On your DVR, the screen will read ID: AA IR: BB.
2. “AA” represents the ID number of the DVR you are using. This is set in the “system setup” menu.
3. “BB” represents the ID nuber of the DVR that the remote control is currently controling.
4. To change which DVR your remote is controlling, press the “ID” button on your remote control.
5. Once pressed, the option to change your IR number will come up.
6. Set which DVR ID number you want your remote to control and press “enter”.
7. The remote will now ONLY work for the set DVR with the same ID number as the set IR number .
GETTING STARTED
MAIN MENU