User manual
302
Order Online
www.mcmelectronics.com
NET 30
Terms
15
Security
section
15
Hand-Held
Camera Set-Up
Monitor
Small, lightweight and portable, this
handy field test monitor features a viewfinder,
eyepiece and TFT microdisplay. Compatible with any
camera utilizing a BNC video output, or with Pelco’s
#3610, 3710, 3770 and IS series integrated 2.5mm
service connector. Specifications: •800 x 225 pixel
TFT microdisplay •Power source: Three “AAA”
batteries •Eight hour continuous operation
•Power consumption: 650mW •Includes batteries,
wrist lanyard and 2.5mm-to-BNC service cable
Order # (ea.)
CST150 $159.00
Multi-Function CCTV
Tester with 2.5"
Color LCD Monitor
The Rapport337 is an
innovative, portable, hand-held tester
that combines six primary functions into a single,
easy to use device. •The 2.5" color LCD monitor
helps adjust camera focus and angle in the field •The
video signal generator can display both color bar and
color raster (red, green blue) to test and adjust your
surveillance monitor’s color, brightness and contrast
•The full-function built-in digital multi-meter tests
voltage, current, resistance and continuity for both
AC and DC current •The protocol analyzer can
determine the protocol of most installed PTZ cameras
•The PTZ controller allows you to program PTZ
cameras •The UTP cable tester identifies opens and
shorts for both straight-through and crossover
UTP/SPT cables. Comes complete with six “AA”
rechargeable Ni-MH batteries for up to four hours
of continuous use, a 12VDC, 1.0A power adaptor to
recharge the Ni-MH batteries, a car charger with 5'
cord (2.1 x 5.5mm DC barrel plug), a carry-case for
both tester and accessories, a 4' BNC M/M patch
cable, a UTP terminating module, and a 3' long
set of test leads. See www.mcmelectronics.com
for more details.
Order # Description (ea.)
82-11560 Rapport337 $549.00
76-108A Replacement test leads 5.99
Video Signal Generator
PTZ Controller PTZ Protocol Analyzer
UTP Cable Tester
CCTV Field Monitor
Multimeter
2.5" Color LCD
Test Monitor
Compact, lightweight
and portable, this
CCTV camera test
monitor is perfect for
quickly focusing and
adjusting field camera installations, saving
both time and money. Includes versatile
carry-case featuring adjustable, hands-free
wrist straps, and fold-up sun-shield for
anti-glare, daytime viewing.
Specifications: BNC composite video
input (1.0V p-p/75ohm) and BNC
composite loop-through output. Video
adjustments for brightness and
color. Viewing angle of 90°, dot pitch
of 0.1025 (W) x 0.163 (H), and contrast
ratio of 150:1. Power: Includes six “AA” batteries, and
has a 9VDC, 250mA jack (adaptor not included,
use #82-3950).
Order # (ea.)
82-11545 $199.00
Composite to VGA
Video Convertor
Use your computer’s CRT or LCD monitor for your
security camera display! Better yet, you can use this
convertor as a switch for displaying video input from
up to 3 devices (security cameras, PCs, DVDs). For
instance, connect four cameras from your color quad
(#82-7850) to the convertor’s BNC composite input.
Then connect your PC’s VGA output to the convertor’s
VGA input. Now you can switch between your PC
display and your camera/quad display. There’s also
an S-video input for a third video input! Features:
Female BNC, VGA and S-video inputs, female VGA
output, NTSC and PAL input signal compatible,
Output resolution up to 1024 x 768 at 60Hz, four
button panel (input, menu, freeze and resolution)
allows control for brightness, contrast, saturation,
hue, and resolution. 5V/1A DC power adaptor and
4' VGA male-male cable included.
Order # Description (ea.)
82-10770 Scan convertor $69.95
83-9694 15" LCD color monitor 179.95
83-10715 17" LCD color monitor 199.00
#83-9694
Camera/Quad DVD PC
(Composite) (S-video) (VGA)
LCD/CRT
(VGA)
5.6" LCD Test Monitor
This LCD Test Monitor
is a genuine time saver
for anyone installing or
servicing CCTV and video
systems. Set up and focus
CCTV cameras without
the need for walkie-talkies
and two people. This 5.6"
TFT LCD monitor has
front panel digital controls and on screen display for
contrast, brightness, color, tint and stores the last
setting when powered off. Built-in speaker with
amplifier for testing audio signals. The re-chargable
12V battery pack will operate the monitor for over
four hours. Specifications: Resolution: 960 x 234
pixels, Video input: 1.0V p-p, 75ohm, via 3.5mm to
“RCA” type cable, Power: 12VDC, 700mA
via re-chargable battery, charger included.
Order # Description (ea.)
82-8185 Test monitor $269.00
82-8190 Replacement battery for #82-8185 29.95
82-10490 Replacement charger 9.95
3.5" Color
LCD Test
Monitor
Portable
3.5" color test
monitor for
troubleshooting
CCTV installations.
Features LCD display for checking video signal, audio
jack for testing audio signal, LED low-battery-level
indicator, and integrated visor to block out sun.
Specifications: •480 x 234 line resolution •Coaxial
cable quality test: Open, short, excellent, good, poor
•Built-in 0.5W speaker •BNC composite video input
(1.0V p-p, 75ohm) and BNC composite loop-through
output •Video adjustments for brightness and color
•Battery charge time; 3 hours; battery life; 4 hours
•Includes power supply, recharger, strap, test cables.
Power: Built-in 2200mA battery; 250mA consumption;
12VDC output.
Order # (ea.)
82-12255 $299.00
Color LCD Security Monitors
Slim, lightweight and portable, Sanyo’s LCD color monitors feature
bright, vivid pictures, 16.7 million colors, picture-in-picture (PIP),
simultaneous computer and security monitor display capability,
multiple display modes (composite video, S-video, VGA),
NTSC/PAL auto recognition, audio I/O, universal power,
one level operation in OSD, and multi-language settings.
Monitor
Order # Mfr. # size Max Resolution (ea.)
82-11016 VMC-L1015 15" 1024 x 768 (XGA) $715.00
82-11017 VMC-L1017 17" 1280 x 1024 (SXGA) 861.00
4" Color LCD Monitor
Set up and focus CCTV
cameras without the
need for walkie-talkies
and two people saving
both time and money.
This 4" TFT LCD
monitor has front
panel digital controls for
contrast, brightness, color, tint and
stores the last setting when powered off. Built-in
speaker with amplifier for testing audio signals.
The re-chargable 12V battery pack will operate
the monitor for over four hours. Specifications:
Resolution: 480 x 234 pixels, Video input: 1.0V p-p,
75ohm, via “RCA” type connector, Power: 12VDC,
700mA via re-chargable battery, charger included.
Order # Description (ea.)
82-4305 Monitor $249.00
82-4306 Replacement battery 19.95
82-10490 Replacement charger 9.95
Color LCD Monitors
C52_pg_302 8/13/07 2:39 PM Page 302