User manual

322
Order Online
www.mcmelectronics.com
NET 30
Terms
15
Security
section
15
VideoEase™
CCTV Pass-Thru
Balun
The VideoEase™
CCTV Pass-Thru
Balun allows video,
two-wire PTZ control, and remote power to be
transmitted via one 4-pair Cat 5 cable, thus
eliminating the need to install multiple cables for
more efficient cabling in the CCTV security and
surveillance environment. The pass-thru balun may
be used in pairs, or in conjunction with standard
twisted pair cross-connect devices and other MuxLab
CCTV baluns such as the 500000, 500009, 500023 and
500015. Features: •Combines video, PTZ control and
remote power under one 4-pair Cat 5 cable for more
efficient cabling •Video up to 2,200' (670m) via Cat 5
UTP •Remote power up to 350' (106m) @ 24VAC/5VA
via two twisted pairs
Order # Mfr. # (ea.)
33-10065 500022 $39.00
VideoEase
LongReach™
The VideoEase
LongReach™ is
an active CCTV
receiver balun
that provides extended distance between the CCTV
camera and the DVR or multiplexer via copper
twisted pair cable. The LongReach™ features
automatic image adjustment for picture brightness,
sharpness and contrast, thereby helping to reduce
on-site service calls. The LongReach™ supports up
to 5,000' (1,5 km) via Cat 5 twisted pair cable when
used in conjunction with MuxLab’s passive CCTV
baluns (500000 and 500009). Features and benefits:
•Automatic image adjustment helps eliminate service
calls •Up to 5,000' (1.5km) via Cat 5 UTP •Connects
directly to the DVR, multiplexer or switcher •Works
with MuxLab passive CCTV baluns •Eliminates the
need for fiber or coax •Supports NTSC or PAL
•Requires 24VAC (not supplied) •Ground loop
blocking •Voltage surge protection •Auto-resettable
fuse •LEDs for power, video and ground loop fault
•Cable strain relief •1 year warranty
Order # Mfr. # (ea.)
33-9735 500015 $250.00
VideoEase™
CCTV Mini Balun
The VideoEase™
CCTV Mini Balun
allows a single
CCTV video signal
to be transmitted via
cost-effective unshielded twisted pair (UTP) cable.
Used in pairs, the CCTV balun eliminates costly
and bulky coaxial cable, allowing CCTV security
and surveillance equipment to be connected using
standard structured cabling techniques for neater
and more streamlined cabling. The flexible mini
coax cable lead allows the product to fit neatly
inside CCTV camera back boxes and dome
camera enclosures. The CCTV balun also works in
conjunction with other MuxLab CCTV baluns such
as the 500000, 500009 and 500015 for a complete
cabling solution. Features and benefits: •Fits inside
CCTV dome cameras and back boxes •Compatible
with other MuxLab CCTV baluns •Up to 2200' (670m)
via Cat 5 UTP •Cable strain relief
Order # Mfr. # (ea.)
33-9760 500023 $36.95
Video Balun
The VideoEase CCTV balun
allows a single CCTV video
signal to be transmitted via
cost effective unshielded
twisted pair (UTP) cable. The CCTV balun eliminates
costly and bulky coaxial cable, allowing CCTV security
and surveillance equipment to be connected using
standard structured cabling techniques for neater
and more streamlined cabling. The CCTV balun is
available in two models; CCTV Screw Terminal Balun
(500009) and Modular CCTV Balun (500000). Both
models may be used interchangeably. Features:
Up to 2200' via Cat 5 UTP, low return loss, lifetime
warranty. Pair required for use, sold individually.
Order # Mfr. # Description (ea.)
82-9485 500000 Modular $34.95
82-9490 500009 Terminal 34.95
Video and Power
Transmission
System
Transmit power
and video signals
over standard UTP
Cat 5 cables. The
video/power balun
carries DC power
along with video
over standard UTP
cable. The built-in
DC plug on the
video/power balun
at the camera end (#82-9300) receives power from the
transmitter (#82-9295). The male BNC to RJ-45 jack
converts 75ohm video to 100ohm video for use with
enconomical UTP CAT5 cables. To monitor and
record the signals use the four channel video balun
(#82-8140) to break the signal back out. The four
channel video balun converts a single 100ohm
RJ-45 single to four 75ohm BNC for transmission over
coaxial cable. Transmits distances up to 1000' for color
video and 2000' for black and white. Using Cat 5e or
greater can increase distances by 20%.
Order # Description (ea.)
82-9295 Video/power transmitter $21.95
82-9300 4 UTP to 1 UTP receiver/transmitter 33.59
82-8140 1 UTP to 4 coax reciever/transmitter 39.95
Connect
w/CAT5 Cable
To Display
To Camera
#82-9300
#82-9295
#82-8140
Back
Back
Back
16 Port Passive Transceiver
Use with passive transceiver/baluns as a receiver
or transmitter for distances up to 2000'. Use with
active receivers to transmit to distances up to
3200'. Power supply included.
Order # (ea.)
82-9340 $269.00
DVR Mount BNC
Video Balun
Unique slim-line design
ideally suited for mounting
to DVR BNC connections to
distributed CCTV video over
Cat 5e UTP wire. Features: •BNC to push-down
locking terminal connections •Precise 75ohm
impedance matching •1,750' range in color; 3,000'
range in B/W •Input: 1V p-p composite video •Signal
noise ratio: 76dB •Dimensions: 1.5" x 0.5" x .625"
Order # (1-9)
82-11332 $18.95
BNC
Video
Baluns
Ideal for distributed CCTV video over Cat 5e UTP
wire, these BNC video baluns feature two styles to
accommodate flexible connections. Features: •BNC
to screw terminal connections •Durable weatherproof
potted construction •Precise 75ohm impedance
matching •1,250' range in color; 2,500' range in B/W
•Input: 1V p-p composite video •Output: Low voltage
current loop to receiver unit •Signal noise ratio: 76dB
•Dimensions: 1.25" x 1.5" x .75"
Order # Description (1-9)
82-11330 w/o 12" pigtail $17.95
82-11331 w/12" pigtail 19.95
#82-11330
#82-11331
Category 5e Convertor Kit
This Cat 5e conversion
kit allows transmission
of video and power over
Cat 5e cable. The kit includes
a transmitter, receiver, and
power supply. Both B&W and color cameras can be
accommodated with the convertor kit. This kit is best
suited for operation up to 600' on Cat 5e cable. Kit
works with any baseband signal and can be used
with all ProVideo cameras and most other cameras.
Connects to Cat 5e through the use of a standard
8 position, 8 conductor RJ-45 jack. Power supply
included. Mfr. #VID-CAT.
Order # (kit)
82-8218 $121.00
Keystone
Mount DC Power
Connection
Features a standard
barrel jack which
accepts connection
from most AC
adaptors. Essential when low voltage must be inserted
into a Cat 5 pair for remote distribution. It is ideal for
remote powering of small LCD monitors, video
cameras, IR repeater systems and similar items. Rear
mounted IDC connector allows simple, fast connection
to unterminated 22~24AWG solid or stranded wire.
Maximum voltage: 24VAC/DC, 1A. Barrel size: 2.1mm
I.D., 5.5mm O.D. •Sold individually
Order # (1-3) (4-up)
50-7752 $6.99 $5.95
16 Port Passive CCTV Hub
The passive 16 port CCTV hub
allows video, remote power and PTZ control to be
transmitted via one Cat 5 cable, thus eliminating the need to install multiple cables for more efficient cabling
in the security video environment. The model 500130 features female BNC connections for coax video output,
and the 500131 has female RJ-45 connectors for twisted pair video output. Features: Space efficient 1U height
•Supports up to 16 inputs •Port switch to set power-
thru, or pass-thru •Pin configuration table on unit
•Works in conjunction with 500000, 500009, 500015,
500022, 500023, 500024, 500029 and 500120 baluns.
Order # Mfr. # (ea.)
33-10125 500130 $525.00
33-10130 500131 525.00
Video Baluns
C52_pg_322 8/13/07 2:59 PM Page 322