Instruction manual

23
PX301
FORMAT THE SD CARD
Formatting your SD card will erase all recorded footage and data from the SD card inserted into the monitor. Be
sure to back up any important footage you would like to keep before formatting the SD card.
To format the SD card:
1. Press the menu button to open the main menu.
2. Use the joystick to scroll to the “Settings” icon and press OK.
3. Use the joystick to scroll to “Format” and press OK.
4. A prompt screen will appear informing you that all the data will be deleted.
5. To format the SD card, use the joystick to scroll to “Yes” and press OK.
6. To cancel and return to the settings menu, use the joystick to scroll to “No” and press OK.
7. Pressing OK for either option will exit the format menu and save your settings.
8. To exit the menu, press the menu button.
You have the option to choose between the following screen savers:
ALARM VOLUME
Your monitor will sound an alarm every time motion is detected by one of the cameras. You can adjust the volume
of the alarm through the settings menu. Adjusting the alarm volume also adjusts the volume of the tone that you
hear whenever you press a button.
To adjust alarm volume:
1. Press the menu button to open the main menu.
2. Use the joystick to scroll to the “Settings” icon and press OK.
3. Use the joystick to scroll to “Alarm Volume” and press OK.
4. Use the joystick to turn the volume up and/or down, 1 bar mutes the alarm and 6 bars is the loudest the alarm
can go.
5. Once you have set the alarm to your liking, press the OK. This will exit the screensaver menu and save
your settings.
6. To exit the menu, press the menu button.
MAIN MENU