Instruction manual

15
PX301
To insert SD card:
1. Insert the SD card into the provided SD card slot on the
side of the monitor.
2. Ensure that the SD card is inserted properly with the metal
readers being inserted rst.
3. Once inserted the [SD] icon will appear on the screen.
4. If the icon does not appear, ensure that the SD card was
put in correctly and that the lock on the side of the SD card
is not in the locked position.
INSERTING SD CARD INTO MONITOR
The PX301 comes equipped with a 2GB SD card. The SD card will be what the recorded footage is saved to. You are
able to watch the recorded footage from the SD card through the monitor or through your computer using an SD
card reader.
Signal: Indicates the signal strength between the camera and monitor. The bars vary
based on connectivity, one bar represents a low connectivity and four bars
represents high connectivity
SD Card: Indicates that there is a SD card inserted into monitor and that it is functioning
properly
No Signal: Indicates that there is no signal between the camera and monitor. The words NO
SIGNAL will also appear on the screen
Unplugged: Indicates that the monitor was recently unplugged from a power source. If a le
name is displayed below this icon the monitor is indicating that there was lost
footage when the monitor was unplugged
Unwatched Footage: This icon indicates that you have unwatched footage on your monitor. If this
icon is red it indicates that you have new footage and that your SD card is full. To
get this icon to stop blinking you must access your recorded footage list. To access
footage see “Playback” on Pg 24-27
Camera: This indicates which camera you are viewing. For more information on camera
views please see “Camera Viewing” on Pg 16
Date/Time: Appears on “CAM1” only. This indicates the set date and time on your monitor. To
adjust the date and time settings, see “Settings” on Pg 20
Record: This icon indicates that you are recording footage. Recording will take place based
on what recording mode is set. For more information about recording modes,
please see “Recording” on Pg 16
LIVE VIEW
Once your monitor is plugged in, turned on and paired with a camera, you will see a live view of the screen. The
screen can display the following information:
→
Insert SD card
GETTING STARTED