Owner`s manual

- 2 -
CONTENTS OF THIS MANUAL
1. IMPORTANT MESSAGE AND INSTRUCTIONS
2. WARNING MESSAGES
3. FEATURES AND SPECIFICATIONS
4. INFORMATION ABOUT CARBON MONOXIDE
5. RECOMMENDED LOCATIONS OF MONITORS
6. LOCATIONS TO AVOID
7. INSTALLATION INSTRUCTIONS
8. FUNCTIONS AND OPERATION
9. TEST AND MUTE MONITOR
10. WHAT TO DO WHEN THE ALARM SOUNDS
11. LIMITATIONS OF CARBON MONOXIDE MONITORS
12. GOOD SAFETY HABITS
13. MONITOR END-OF-LIFE AND SERVICE
14. DESCRIPTION OF AUDIBLE AND VISUAL SIGNALS
15. THREE-YEAR LIMITED WARRANTY
1. IMPORTANT MESSAGE AND INSTRUCTIONS
IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND
SAVE THIS MANUAL FOR FUTURE REFERENCE. Do not try to repair this CO
monitor yourself. Refer to the instructions in Section 13 for service.
CAUTION! THIS MONITOR WILL ONLY INDICATE THE
PRESENCE OF CARBON MONOXIDE GAS AT THE SENSOR. CARBON
MONOXIDE GAS MAY BE PRESENT IN OTHER AREAS. THIS CARBON
MONOXIDE MONITOR IS DESIGNED TO DETECT CARBON MONOXIDE GAS
FROM ANY SOURCE OF COMBUSTION. IT IS NOT DESIGNED TO DETECT
SMOKE, FIRE OR ANY OTHER GAS. THIS DEVICE IS DESIGNED TO HELP
PROTECT INDIVIDUALS FROM THE EFFECTS OF CHRONIC EXPOSURE TO LOW
LEVELS OF CARBON MONOXIDE, THOUGH IT MAY NOT FULLY SAFEGUARD
INDIVIDUALS WITH SPECIFIC MEDICAL CONDITIONS. IF IN DOUBT, CONSULT A
MEDICAL PRACTITIONER.
CAUTION! CO detection is best achieved by the installation of CO
alarms and monitors in all rooms and areas of the residence or facility.
IMPORTANT! This monitor must be replaced after five years from
installation date. Write the replacement date onto the “REPLACE BY” label
affixed to bottom of monitor.
!
!