Datasheet

PLAYBACK

There are two types of les available for playback ; RECORD SEARCH les or EVENT SEARCH les. These searches allow

you to nd footage recorded from particular dates and times.

There are three ways to access the SEARCH menu for playback:

1. Press the PLAY button on the DVR remote.

2. Right click the mouse on the screen and select the RECORD SEARCH icon from the FUNCTION TOOLBAR.

3. Access the MAIN MENU and select SEARCH.

reCord searCh taB

Allows you to nd recorded footage from particular dates and times.

To access and playback footage from a particular date and time:

1. Click on the channel you would like to search (1). Then, enter the date in the SEARCH DATE box (2). Select the ENTER

key. Click the SEARCH button (3) to open up the search times for that date.

• Onceyouhavesearchedforaparticularmonth,youcanviewtimesandfootagefromeachdayofthatmonth

by double clicking on the day in the calendar below (4).

• ThedaysandtimesthathaveMotion/Alarmrecordedfootagestoredonthemareredinthetimeschedule(5).

• ThedaysandtimesthathaveScheduleRecordingstoredonthemaregreen.

• Ifthetimeisnotredorgreen,itmeanstherewasnorecordingduringthattime.

2. To search for a particular TIME on a set date, select the REPLAY TIME box (6) input the start time of the footage you

would like to view. Select the ENTER key. Click on PLAYBACK (7) to start viewing from that date and time.

3. If footage was recorded within the selected date and time slot, the footage will begin to play. If nothing was

recorded, a screen will appear and read "NO RECORD FILE FOUND". Check your Date/Time and try searching to see

what video footage is available.

PLAYBACK

1 2 3